广东工业大学学报 ›› 2022, Vol. 39 ›› Issue (01): 99-106.doi: 10.12052/gdutxb.200128

• 综合研究 • 上一篇    下一篇

多流程分液板式冷凝器的变工况性能研究

梁志颖, 陈健勇, 陈颖, 罗向龙, 杨智, 梁颖宗   

  1. 广东工业大学 材料与能源学院, 广东 广州 510006
  • 收稿日期:2020-09-30 发布日期:2022-01-20
  • 通信作者: 陈健勇(1983-),男,副教授,硕士生导师,主要研究方向为制冷系统节能、强化传热,E-mail:jianyong@gdut.edu.cn
  • 作者简介:梁志颖(1995-),男,硕士研究生,主要研究方向为换热器强化与优化
  • 基金资助:
    广州市科技计划项目(201704030108)

A Study of the Variable Performance of Multi-path Liquid-vapor Separation Plate Condenser

Liang Zhi-ying, Chen Jian-yong, Chen Ying, Luo Xiang-long, Yang Zhi, Liang Ying-zong   

  1. School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2020-09-30 Published:2022-01-20

HTML

PDF (PC)

2753

摘要： 将“分液冷凝”强化传热应用于板式冷凝器, 建立了多流程分液板式冷凝器的物理和数学模型, 采用性能评价参数(η)比较了相同传热面积的4种结构板式冷凝器(普通型、两流程、三流程和四流程)的热力性能。结果表明：流程数越多, 分液板式冷凝器的综合性能越好, 其η最高, 为1.12。普通型板式冷凝器后一流程的传热系数比前一流程要低, 而分液冷凝器与之相反。在相同工况下, 分液冷凝器的热负荷与出口干度均高于普通型板式冷凝器。

关键词: 分液板式冷凝器, 多流程, 性能评价参数, 传热系数

Abstract: In this paper, the liquid-separation condensation, which is a heat transfer enhancement technology, is applied to the plate condenser. The physical and mathematical models of the liquid-separation plate condenser with multi-path are established. The thermal performance of four plate condensers (conventional type, two-path, three-path and four-path) having the same heat transfer area is compared by using performance evaluation parameters (η). The results show that the performance of liquid-separation plate condenser increases with the path numbers. The η can reach up to 1.12. In the conventional plate condenser, the heat transfer coefficient in the later path is lower than that in the previous path, whereas it is opposite in the liquid-separation plate condenser. Under the same working condition, the heat load and vapor quality at the outlet of liquid-separation plate condenser are higher than these of the conventional plate condenser.

Key words: liquid-vapor separation plate condenser, multi-path, performance evaluation parameters, heat transfer coefficient

中图分类号: 

  • TB657.5
[1] TAO X, NUIJTEN, MENNO P, et al. Two-phase vertical downward flow in plate heat exchangers: Flow patterns and condensation mechanisms [J]. International Journal of Refrigeration, 2018, 85: 489-510.
[2] YAN Y Y, LIO H C, LIN T F, et al. Condensation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger [J]. International Journal of Heat and Mass Transfer, 1999, 42(6): 993-1006.
[3] SHI Z Y, CHEN J P, GRABENSTEIN V, et al. Experimental investigation on condensation heat transfer and pressure drop of R134a in a plate heat exchanger [J]. Heat and Mass Transfer, 2010, 46(10): 1177-1185.
[4] AHMAD M, BERTHOUD G, MERCIER P, et al. General characteristics of two-phase flow distribution in a compact heat exchanger [J]. International Journal of Heat and Mass Transfer, 2009, 52(1): 442-450.
[5] ARSENYEVA O P, TOVAZHNYANSKY L, KAPUSTENKO P, et al. Investigation of the new corrugation pattern for low pressure plate condensers [J]. Applied Thermal Engineering, 2011, 31(13): 2146-2152.
[6] SARRAF K, LAUNAY S, ACHKAR G E, et al. Local vs global heat transfer and flow analysis of hydrocarbon complete condensation in plate heat exchanger based on infrared thermography [J]. International Journal of Heat and Mass Transfer, 2015, 90: 878-893.
[7] 彭晓峰, 吴迪, 张扬. 高性能冷凝器技术原理与实践[J]. 化工进展, 2007, 26(1): 97-107.
PENG X F, WU D, ZHANG Y. Principle and practice of high performance condenser technology [J]. Chemical Progress, 2007, 26(1): 97-107.
[8] ZHONG T M, CHEN Y, ZHENG W X, et al. Experimental investigation on microchannel condensers with and without liquid-vapor separation headers [J]. Applied Thermal Engineering, 2014, 73(2): 1510-1518.
[9] 刘策, 贾力, 张旋. R134a在风冷分液式冷凝换热器中的换热性能研究[J]. 工程热物理学报, 2019, 40(7): 1620-1626.
LIU C, JIA L, ZHANG X. Study on heat exchange performance of air-cooled separated-liquid condensing heat exchanger [J]. Journal of Engineering Thermophysics, 2019, 40(7): 1620-1626.
[10] 范亚坤, 贾力, 党超. 气液分离式管内凝结冷凝器的实验研究[J]. 北京交通大学学报, 2016, 40(6): 115-121.
FAN Y K, JIA L, DANG C. Experimental study on liquid-vapor separation condenser in tube [J]. Journal of Beijing Jiaotong University, 2016, 40(6): 115-121.
[11] 朱康达, 陈颖, 陈健勇, 等. 分液板式冷凝器的热力性能评价[J]. 广东工业大学学报, 2019, 36(5): 48-55.
ZHU K D, CHEN Y, CHEN J Y, et al. Evaluation of the thermal performance of plate condenser [J]. Journal of Guangdong University of Technology, 2019, 36(5): 48-55.
[12] CHEN J Y, ZHU K D, LUO X L, et al. Application of liquid-separation condensation to plate heat exchanger: Comparative studies [J]. Applied Thermal Engineering, 2019, 157: 113739.
[13] LIANG Z Y, CHEN J Y, LUO X L, et al. Investigation of plate condenser with multiply liquid-separations[C]//11th International Conference on Applied Energy. Västerås, Sweden: Elsevier, 2019.
[14] 罗向龙, 许俊俊, 陈颖, 等. 一种具有分液功能的板式冷凝器: CN201510542125.1[P]. 2017-06-16.
[15] 朱康达. 分液板式冷凝器的性能及其在热泵系统中的应用[D]. 广州: 广东工业大学, 2019.
[16] LONGO G A, RIGHETTI G, ZILIO C. A new computational procedure for refrigerant condensation inside herringbone-type Brazed Plate Heat Exchangers [J]. International Journal of Heat and Mass Transfer, 2015, 82: 530-536.
[17] KUO W S, LIE Y M, HSIEH Y Y, et al. Condensation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger [J]. International Journal of Heat and Mass Transfer, 2005, 48(25-26): 5205-5220.
[18] MULEY A, MANGLIK R M. Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates [J]. Journal of Heat Transfer, 1999, 121(1): 110-117.
[19] XIE J, XU J, CHENG Y, et al. Condensation heat transfer of R245fa in tubes with and without lyophilic porous-membrane-tube insert [J]. International Journal of Heat and Mass Transfer, 2015, 88: 261-275.
[1] 朱康达, 陈颖, 陈健勇, 罗向龙, 姚远, 梁志颖. 分液板式冷凝器的热力性能评价[J]. 广东工业大学学报, 2019, 36(05): 48-55,70.
[2] 丁榕, 李云海, 陈健勇, 陈颖, 罗向龙, 杨智. 带分液结构蒸发器的性能研究[J]. 广东工业大学学报, 2018, 35(04): 105-110.
[3] 钟浩元, 张仁元, 史保新, 李石栋, 刘良德. 热二极管在储能式太阳热水器中的应用研究[J]. 广东工业大学学报, 2010, 27(1): 42-46.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发