Loading...
Current Issue
  • , Volume 22 Issue 1 Previous Issue    Next Issue
    Comprehensive Studies
    Theoretical Study of the stable Structure and Charge Population of Ca~+-Thymine Complex
    ZHANG Xing-chu,HU Yi-hua,WU Huai-xuan,WU Hua
    Journal of Guangdong University of Technology. 2005, 22 (1): 1-6.  
    Abstract    HTML ( )   PDF(228KB)
    Optimized structure,metal affinities and charge population of thymine-Ca+complex are determined by employing Density Functional Theory(DFT) at a high level of the B3LYP exchange correlation potential in connection with the 6-311+G(2df,2p) basis set.Compared with other tautome of thymine,T3-Ca+is the most stable one and its charge redistribution is most obvious.
    References | Related Articles | Metrics
    Effect of Annealing Temperature on the Optical Properties of PbZrO3Thin Films
    JIANG Li-li~(1) , TANG Xin-gui~(2), TANG Zhen-fang~(3)
    Journal of Guangdong University of Technology. 2005, 22 (1): 7-9.  
    Abstract    HTML ( )   PDF(162KB)
    PbZrO(3)(PZ) thin films grown on fused quartz substrates are prepared by sol-gel process. The crystal structure of PZ thin films has been studied by XRD. The results show that the well-crystallized PZ thin film is pseudocubic phase. When the film on fused quartz substrate is annealed at 750?℃, the grain size is about 30~50?nm. The optical transmittance spectra of the PbZrO(3)thin films on fused quartz substrates annealed at 450, 600 and 750?℃ are measured with a double-beam UV-VIS scanning spectrophotometer. The transmission spectra of the samples are measured, using air as a reference at a wavelength range 200 to 900?nm. The results show that the band gaps are 4.11, 4.56 and 4.59?eV, respectively, for the films annealed at 450, 600 and 750?℃.
    References | Related Articles | Metrics
    The Effect of Filling Content of Modified Sericite on Polyethylene Mechanical Property
    ZHAO Huang,ZHANG Jing-yang,WU Wei-duan
    Journal of Guangdong University of Technology. 2005, 22 (1): 10-14.  
    Abstract    HTML ( )   PDF(124KB)
    A modified sericite used as polyethylene reinforcing filler is developed by changing sericite squama structure by means of supersonic gas crushing and chemical surface modification. The interface behaviors of modified sericite and polyethylene composite, as well as the effect of filling content of modified sericite on polyethylene mechanical property, have been studied. The results have benefit to the nonmetallic mineral deep processing and the investigation of resin based composites.
    References | Related Articles | Metrics
    Experimental Study on Polishing-like Grinding of Diamond Based on Elastic System
    YAO qiang,FU Hui-nan,WANG Hong-xia
    Journal of Guangdong University of Technology. 2005, 22 (1): 15-19.  
    Abstract    HTML ( )   PDF(238KB)
    A method of polishing-like grinding of diamond is introduced based on elastie system.A series of experiments are done and the results show that high quality diamond face can be got with this metod.
    References | Related Articles | Metrics
    Optimization Expert System of Plastic Die Materials
    CHEN Wei,WANG Gui-tang, PAN Zhen-peng,CAI Lian-shu
    Journal of Guangdong University of Technology. 2005, 22 (1): 20-25.  
    Abstract    HTML ( )   PDF(0KB)
    The plastic die materials optimization expert system complies with the principle of meeting the required properties of dies, taping the latent power of die materials and having reasonable economy and feasible technology. According to the proposed technique requirements by users, it would recommend the selected die materials with requisite technique data through optimization inference of materials selection, the technique documents management of user, the knowledge management of system and the management of system. The system is developed in windows environment by means of Visual C6.0 and inference process is operated on the basis of the rules or examples. It also provides the friendly and transparent interfaces with the Chinese demonstration, fast operating capacity and convenient application.
    References | Related Articles | Metrics
    Guaranteed Cost Control of Linear Uncertain Singular Systems Based on the State Observer
    LIU Cen-feng~1,HU Gang~2
    Journal of Guangdong University of Technology. 2005, 22 (1): 26-31.  
    Abstract    HTML ( )   PDF(1274KB)
    The guaranteed cost control problem is studied for a class of linear uncertain singuiar systems in the paper.Memoryless state feednback controllers based on the state observer are designed.A sufficient condition for the existence of guaranteed cost controllers is given.Under some conditions the guaranteed cost controllers of the systems can be obtained via LMI.
    References | Related Articles | Metrics
    The Control Technology Research of Matrix Converter
    ZHANG Miao~(1),WU Jie~2,ZHAO Hui~1
    Journal of Guangdong University of Technology. 2005, 22 (1): 32-36.  
    Abstract    HTML ( )   PDF(227KB)
    This paper studies the control principle of matrix converter,based on the technotogy of PWM,analyzes the switch on/off mode of matrix converter power modules,and presents a novel control scheme of switching power modules to overcome the surge voltage during the process of the power modules switching on/off.The simulating results based on Simetrix 4.2 and Matlab are presented at last.
    References | Related Articles | Metrics
    Snake Model Based on MR-MS and Its Application
    DING Wei,CHENG Si-yuan,ZHANG Xiang-wei
    Journal of Guangdong University of Technology. 2005, 22 (1): 37-41.  
    Abstract    HTML ( )   PDF(176KB)
    The snake model,which was developed by Kass et a1.in 1987,has absorbed a lot of gttention of researchers in the fleld of computer vision,and is applied to many cases of computer virsion.To solve its limitation,a new shake model bascd on MR-MS (muti-resolution and multi-scale) is presented and used for meadical image segmentation.The result of experiments shows that this new model is feasible.
    References | Related Articles | Metrics
    Bionics Study of Swimming Micro Robot
    ZHONG Ying-chun~1,LI Fang~2,LIN Zhen-rong~2
    Journal of Guangdong University of Technology. 2005, 22 (1): 42-46.  
    Abstract    HTML ( )   PDF(173KB)
    The swimming micro robot is a new kind of robot which is driven by micro drivers and simulates the aquatic motion mechanism . Based on the detailed description of flagellum and fish propulsion mechanism , this paper systematically summarizes their references and suggestion for swimming micro robot study, which can be consulted for future resarch .
    References | Related Articles | Metrics
    The Frame in the Applications of Warehouse Monitoring Intelligent Track System to Dynamic Goals
    LIANG Zhi-yong, YI Jun, TANG Ping, LIU Wen-juan
    Journal of Guangdong University of Technology. 2005, 22 (1): 47-52.  
    Abstract    HTML ( )   PDF(208KB)
    This article focuses on a new method of realizing the instant warehouse monitoring and auto-tracking system based on frame processing.This method is of the characteristics of digitalization,intelligence and realizing real-time and reliable detection and intelligent tracking to the dynamic goal.By using digital image processing technique, the unmanned monitoring system is implemented, which can greatly impove the working efficiency and the automatic level of imformation.
    References | Related Articles | Metrics
    The Research and Application of Analysis Services Component Model in Data Mining
    LU Qing,YU Yong-quan
    Journal of Guangdong University of Technology. 2005, 22 (1): 53-56.  
    Abstract    HTML ( )   PDF(0KB)
    Analysis Services Component is a data mining tool component of SQL Server 2000, which is under a Windows environment Analysis services component of SQL Server 2000 is analyzed and the methods of data mining are also discussed in this paper. Lastly a practical example about creating data mining application with DDL which is similar to SQL is given.
    References | Related Articles | Metrics
    Research on the Application of CORBA in Real-time Distributed Multimedia System
    LIU Jiang-hui, XIE Cui-ping
    Journal of Guangdong University of Technology. 2005, 22 (1): 57-60.  
    Abstract    HTML ( )   PDF(134KB)
    The concepts of real-time distributed multimedia system and CORBA are introduced in this paper.Some questions of CORBA are analyzed on its applications in multimedia system.An object service frame of MM-ORB is given,which affords QoS management for the distributed multimedia system.
    References | Related Articles | Metrics
    The Application of Knowledge Management in Office Automation of Polybasicity Center of Guangzhou Railway Group
    DING Lei~(1 ),HE Jian-jun~(2)
    Journal of Guangdong University of Technology. 2005, 22 (1): 61-66.  
    Abstract    HTML ( )   PDF(0KB)
    This article mainly discusses the Office Automation System design and solution plan of Polybasicity Center of Guangzhou Railway Group.It emphasizes the hardware and software basis of OA system and the idea of knowledge management.An analysis of the realization of the core application of OA system—document management and e-mail is given,which is followed by a summary of the overall function of OA system.
    Related Articles | Metrics
    Research on Electronic Commerce Security Transmission System
    XU Shao-qiang, LING Jie, LI Hong-lei
    Journal of Guangdong University of Technology. 2005, 22 (1): 67-71.  
    Abstract    HTML ( )   PDF(184KB)
    Basedon the multiplicity of the EC information,this paper introduces a method that combines Cipher mechanism with information hiding and digital watermark to implement the secrecy,integrity and concealment of the commerce information,It can not only authenticate the commerce information.but also protect the copyright of the image information.
    References | Related Articles | Metrics
    Dual Three-phase Space Vector Pulse Width System and Simulation
    CHEN Ying-hua,JIN Ai-juan
    Journal of Guangdong University of Technology. 2005, 22 (1): 72-77.  
    Abstract    HTML ( )   PDF(242KB)
    This paper introduces dual three-phase space vector pulse width modulatcon (SVPWM)and machine model,deduces a set of voltage control vector based on d-q subspace,analyzes a six-leg,six-phase inverter,and presents techniques for dual three-phase SVPWM.the simulation by simulink in Matlab 6.5 is compared to a sine-triangte PWM in terms of dc bus utilization.In the end ,the simulation results are given.
    References | Related Articles | Metrics
    Study on Adaptive Protection System Based on Multi-agent
    CHEN Shao-hua, CHEN Jing-hua, YANG Yi-min
    Journal of Guangdong University of Technology. 2005, 22 (1): 78-82.  
    Abstract    HTML ( )   PDF(254KB)
    According to the analyzsis of conventional protection’s merits, a MAS based on adaptive protection system is presented. The architecture and function model of the system is constructed. Served as an example, a scheme of the current protection using agent technology is introduced. The PSCAD/EMTDC’s simulation results verify the validity of the proposed scheme.
    References | Related Articles | Metrics
    Automatic Meter Reading Device through GPRS Based on Embedded Linux
    ZHANG Xue-xi
    Journal of Guangdong University of Technology. 2005, 22 (1): 83-87.  
    Abstract    HTML ( )   PDF(243KB)
    This paper introduces a project of automatic meter reading device for electric power based on Linux, which is made up of MPC860 and wireless communication module. It promotes the level of meter reading through GPRS to transmit data.
    References | Related Articles | Metrics
    Software Analysis of Sound Image Trait for 5.1 Channel Surround Sound System
    GUO Tian-kui
    Journal of Guangdong University of Technology. 2005, 22 (1): 88-91.  
    Abstract    HTML ( )   PDF(192KB)
    By using a newly-made software for stereophonic and surround sound image analysis ,this paper analyzes sound image localization trait for 5.1 channel surround sound system.The result is consistent with that of computation based on surround sound image localization formular.The software also evaluates the sound image clearness and naturalness of the system.
    References | Related Articles | Metrics
    Analysis and Process on Error of Dielectric Loss Measure in Electrical Equipment
    LIU Xiao-bo
    Journal of Guangdong University of Technology. 2005, 22 (1): 92-94.  
    Abstract    HTML ( )   PDF(121KB)
    Influenced by the outer electrical field, the error of measured value of dielectric loss is considerable.In order to improve the accuracy, the interference current is analyzed and processed in this paper.
    References | Related Articles | Metrics
    The Development of Data Manager Modulus for Structural Analysis Pretreatment Software
    YUAN Bing,HUANG Yan-sheng
    Journal of Guangdong University of Technology. 2005, 22 (1): 95-99.  
    Abstract    HTML ( )   PDF(171KB)
    Based on many years experiences of developing pretreatment software of structural analysis, this article briefly introduces the data structure,its managing methods, the skills of data saving and data reading, which are suitable for developing pretreatment software of structural analysis. It provides useful references for developing related software.
    References | Related Articles | Metrics
    Modal Test of Long Span Bridges Based on Ambient Excitation
    HU Li-ping~(1),HAN Da-jian~(1),YU Zhi-tao~(2)
    Journal of Guangdong University of Technology. 2005, 22 (1): 100-104.  
    Abstract    HTML ( )   PDF(169KB)
    This paper presents the theory and methodology of a relatively simple and practical modal test approach based on ambient excitation for long span bridges. In this approach, some fundamental parameters, such as mode shapes and their corresponding frequencies as well as the damping ratios, can be found by a fast process of spectra analysis of the measured response signal. Also, its results are direct and reliable. The successful practices of the modal test on Guangdong Jinma Cable-stayed Bridge shows that the method is valid.
    References | Related Articles | Metrics
    Study on the Bearing Mechanism of Rigid Pile Composite Ground with Discrete Element Method
    BAO Peng~(1,2),ZHANG Hui~1,JIANG Xin-liang~2
    Journal of Guangdong University of Technology. 2005, 22 (1): 105-109.  
    Abstract    HTML ( )   PDF(169KB)
    In this paper, the bearing capacity of rigid pile composite ground under vertical loads and the law of variation of pile-soil bearing ratio among pile-soil interaction are calculated and analyzed on the basis of discrete element method of the deformable body model, which describes the bearing mechanism of pile-soil interaction of rigid pile composite ground. The method of how to ascertain the bearing capacity of rigid pile composite ground is presented .
    References | Related Articles | Metrics
    Study on the Performances of New Model Non-adjustment Static Pressure Supply Air Duct
    YANG Wan-sheng ~(1), ZHANG Ji-guang ~(2),HAN Hai-tao~2
    Journal of Guangdong University of Technology. 2005, 22 (1): 110-114.  
    Abstract    HTML ( )   PDF(0KB)
    In this paper the performance of uniform static pressure ventilating duct is analyzed on the basis of flow dynamics ,and its mathematic model offlow is deduced on the analyzing basis.At the same time the law and specialty of velocity’s variation and static pressure in the main ventilating duct are studied. In the end through the experiments the result of analysis is testified and the improving measures for the duct are pointed out.
    References | Related Articles | Metrics
    An Analysis of Technological Contribution to Output Increase in Construction Industry of China
    WANG You-song, ZHANG Yan
    Journal of Guangdong University of Technology. 2005, 22 (1): 115-118.  
    Abstract    HTML ( )   PDF(0KB)
    Based on the statistical data from 1984 to 2001, this paper employs Cobb-Douglas production function and the method of Solow remaining value to calculate and analyze the contributions to the total output increase in construction industry of China. The results show that its annual increase rate of the total output is 16.91% in average during the period. The main contributions come from capital input with (65.11%) and labor input with 20.29%. However, technology contributes only 14.60%. It is manifested that technological progress is not significant enough in the traditional construction industry. The total output increase belongs to external expanding development. In the new situation of entering WTO, therefore, it is urgent to enhance the efficiency and expand internal improvements to meet the challenges in the future.
    Related Articles | Metrics
    Oscillation for Second Order Half-linear Functional Differential Equations
    XING Hong-yan
    Journal of Guangdong University of Technology. 2005, 22 (1): 119-123.  
    Abstract    HTML ( )   PDF(154KB)
    By means of auxilliary functions and Young inequality technique,new oscillation criteria are established for second order half-linear functional differential equations.Its results extend and improve the oscillation theorem of Agarwal R.P.et al.
    References | Related Articles | Metrics