广东工业大学学报 ›› 2017, Vol. 34 ›› Issue (02): 54-57.doi: 10.12052/gdutxb.150144

• 综合研究 • 上一篇    下一篇

6005A-T6铝合金搅拌摩擦焊缝的自然时效效应

何理谦, 袁鸽成, 骆志捷, 郭海斌   

  1. 广东工业大学 材料与能源学院, 广东 广州 510006
  • 收稿日期:2015-12-24 出版日期:2017-03-09 发布日期:2017-03-09
  • 作者简介:何理谦(1991-),男,硕士研究生,主要研究方向为先进轻金属材料.
  • 基金资助:

    广东省重大科技专项（2008A090300004）；广东省教育厅211工程学科建设项目（412110903）

Natural Aging Effect in Friction Stir Welding of 6005A-T6 Aluminum Alloy

He Li-qian, Yuan Ge-cheng, Luo Zhi-jie, Guo Hai-bin   

  1. School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2015-12-24 Online:2017-03-09 Published:2017-03-09

HTML

PDF (PC)

3123

摘要：

采用搅拌摩擦焊机焊接6005A-T6铝合金挤压型材，借助力学拉伸试验机、显微硬度仪、光学显微镜、能谱仪和透射电镜探明了自然时效对其焊缝力学性能的影响规律.结果表明：6005A-T6铝合金搅拌摩擦焊缝随自然时效时间延长，其抗拉强度和焊缝焊核区的硬度均先提高并趋于稳定，而焊缝热影响区的硬度则保持不变，延伸率也变化不大；自然时效720 h后，焊缝达到稳定的自然时效状态；焊缝自然时效后其抗拉强度与焊核区硬度提高的主要原因是在自然时效过程中焊核区析出了较多细小且弥散的Mg2Si强化相.

关键词: 6005A铝合金, 搅拌摩擦焊, 自然时效, 力学性能

Abstract:

The 6005-T6 aluminum alloy extrusion profiles were obtained by friction stir welding. With the help of mechanical tensile test machine, Vickers hardness tester, optical microscope (OM), energy dispersive spectrometer (EDS) and transmission electron microscopy (TEM), the effect of natural aging on the mechanical properties of the welding joints is proven. The results shows that the 6005-T6 aluminum alloy with the extension of the natural aging time after welding, its tensile strength and the nugget zone (NZ) hardness increasing firstly and tending to be stable while the hardness of the weld heat affected zone (HAZ) remains unchanged and elongation changes a little. The FSW joints achieves the stable natural aging condition after natural aging 720 h. Natural aging improves the tensile strength and the hardness of welding joints mainly because the nugget zone precipitates more small and dispersed Mg2Si phases in the process of natural aging.

Key words: 6005A-T6 aluminum alloy, friction stir welding, natural aging, mechanical properties

中图分类号: 

  • TG146.2

[1] MISHRA R S, MA Z Y. Friction stir welding and processing[J].Mater Sci Eng R, 2005, 50(1-2):1-78.
[2] NANDAN R, DEBROY T, BHADESHIA H K D H. Recent advances in friction stir welding-process, weldment structure and properties[J]. Prog Mater Sci, 2008, 53(6):980-1023.
[3] FU R D, ZHANG J F, LI Y J, et al. Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet[J]. Materials Science & Engineering A, 2013, 559(1):319-324.
[4] ZHANG Z, XIAO B L, MA Z Y. Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al-T351 joints[J]. Acta Materialia, 2014, 73:227-239.
[5] HU Z L, WANG X S, PANG Q, et al. The effect of postprocessing on tensile property and microstructure evolution of friction stir welding aluminum alloy joint[J]. Materials Characterization, 2015, 99:180-187.
[6] KALEMBA I, HAMILTON C, DYMEK S. Natural aging in friction stir welded 7136-T76 aluminum alloy[J]. Materials & Design, 2014, 60:295-301.
[7] 董春林, 张坤, 栾国红, 等.自然时效对7050铝合金搅拌摩擦焊接头性能的影响[J].焊接学报, 2014, (4):15-18.DONG C L, ZHANG K, LUAN G H, et al. Effects of natural aging on joint properties of friction stir welded 7050 aluminum alloy[J].Transactions of the China Welding Institution, 2014, (4):15-18.
[8] FULLER C B, MAHONEY M W, CALABRESE M, et al. Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds[J]. Materials Science and Engineering A, 2010, 527(9):2233-2240.
[9] IMAM M, RACHERLA V, BISWAS K. Effect of post-weld natural aging on mechanical and microstructural properties of friction stir welded 6063-T4 aluminum alloy[J]. Materials and Design, 2014, 64:675-686.
[10] WOO W, CHOO H, WITHERS P J, et al. Prediction of hardness minimum locations during natural aging in an aluminum alloy 6061-T6 friction stir weld[J]. Journal of Material Science, 2009, 44(23):6302-6309.
[11] DOUDE H, SCHNEIDER J, PATTON B, et al. Optimizing weld quality of a friction stir welded aluminum alloy[J]. Journal of Materials Processing Technology, 2015, 222:188-196.
[12] WADE M, REYNOLDS A P. Friction stir weld nugget temperature asymmetry[J]. Science and Technology of Welding and Joining, 2010, 15(1):64-69.
[13] 梁春朗, 袁鸽成, 吴红辉, 等.5083铝合金搅拌摩擦焊焊核区非均匀性组织分析[J].广东工业大学学报, 2013, 30(3):118-121.LIANG C L, YUAN G C, WU H H, et al. Research on heterogeneity microstructure of 5083 aluminum in nugget zones after friction stir welding[J]. Journal of Guangdong University of Technology, 2013, 30(3):118-121.
[14] 刘洪, 袁鸽成, 黄泽涛, 等. 5083-H321铝合金板材搅拌摩擦焊缝组织演变[J].广东工业大学学报, 2012, 29(3):96-98.LIU H, YUAN G C, HUANG Z T, et al. The microstructural evolution of friction stir welded 5083-H321 aluminum alloy plates[J]. Journal of Guangdong University of Technology, 2012, 29(3):96-98.
[15] DONG P, LI H M, SUN D Q, et al. Effects of welding speed on the microstructure and hardness in friction stir welding joints of 6005A-T6 aluminum alloy[J]. Materials & Design, 2013, 45:524-531.
[16] SIMAR A, BRECHET Y, MEESTER B D, et al. Integrated modeling of friction stir welding of 6xxx series Al alloys:Process, microstructure and properties[J]. Progress in Materials Science, 2012, 57(1):95-183.
[17] 钟沐春, 姜锋, 黄宏锋.铝镁硅合金自然时效的析出强化组织及性能[J]. 航空材料学报, 2015, 35(5):39-45.ZHONG M C, JIANG F, HUANG H F. Effect of precipitation strengthening during natural aging in Al-Mg-Si alloy[J]. Journal of Aeronautical Materials, 2015, 35(5):39-45.
[18] 杨文超.Al-Mg-Si-Cu系6005A合金的时效硬化行为及析出相的微观结构表征[D].长沙:中南大学材料科学与工程学院, 2011.
[1] 戴美玲, 程成, 吴智文, 卢镇伟, 卢杰迅, 杨坚, 杨福俊. 开孔空心球结构的准静态压缩力学行为[J]. 广东工业大学学报, 2022, 39(04): 83-90,97.
[2] 禹智涛, 潘浩, 贺绍华. 预应力轴压比对节段拼装桥墩力学性能影响分析[J]. 广东工业大学学报, 2019, 36(04): 85-91.
[3] 吴亚, 袁鸽成, 刘华, 张普, 袁潜, 秦典成. 搅拌摩擦焊接6063铝合金板材焊缝腐蚀特性[J]. 广东工业大学学报, 2014, 31(1): 126-130.
[4] 梁春朗，袁鸽成，吴红辉，吴亚. 5083铝合金搅拌摩擦焊焊核区非均匀性组织分析[J]. 广东工业大学学报, 2013, 30(3): 118-121.
[5] 刘洪，袁鸽成，黄泽涛，梁春朗，吴亚，吴红辉. 5083-H321铝合金板材搅拌摩擦焊缝组织演变[J]. 广东工业大学学报, 2012, 29(3): 96-98.
[6] 刘尧； 李风； . 半固态成形工艺对Sn-Bi合金性能的影响[J]. 广东工业大学学报, 2008, 25(4): 24-27.
[7] 钟大钜； 吴黎明；. 木材刚度的工业测评方法研究[J]. 广东工业大学学报, 1999, 16(3): 77-80.
[8] 袁鸽成； 黎祚坚； 娄燕雄； 张新明； . 硅含量对新型铝锡硅合金室温力学性能的影响[J]. 广东工业大学学报, 1998, 15(1): 7-10.
[9] 黄钧声. 热处理对硬质合金组织和性能的作用[J]. 广东工业大学学报, 1996, 13(1): 54-60.
[10] 周彦豪, 张立群, 李晨, 吴卫东, 陈涛, 李东红. 短纤维－橡胶复合材料开发研究的新进展[J]. 广东工业大学学报, 1995, 12(4): 1-9.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发