广东工业大学学报 ›› 2018, Vol. 35 ›› Issue (01): 56-60.doi: 10.12052/gdutxb.170035

• • 上一篇    下一篇

能量平衡模型的涡轮增压器控制

曾繁武1, 熊锐1, 吴坚1,2, 杜锡滔1, 朱敏思1   

  1. 1. 广东工业大学 机电工程学院, 广东 广州 510006;
    2. 广州汽车集团有限公司 汽车工程研究院, 广东 广州 510640
  • 收稿日期:2016-02-21 出版日期:2018-01-09 发布日期:2017-12-22
  • 作者简介:曾繁武(1992-),男,硕士研究生,主要研究方向为发动机电控、汽车节能与排放控制.
  • 基金资助:
    广东省科技厅省部产学研结合基金资助项目(2013B090400002)

Turbocharger Control Based on Energy Balance Model

Zeng Fan-wu1, Xiong Rui1, Wu Jian1,2, Du Xi-tao1, Zhu Min-si1   

  1. 1. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China;
    2. Automotive Engineering Institute, Guangzhou Automobile Group Co. Ltd., Guangzhou 511434, China
  • Received:2016-02-21 Online:2018-01-09 Published:2017-12-22

摘要: 以废气涡轮增压器控制机构的物理模型为基础,应用能量平衡方程与力平衡方程,对涡轮机构和控制机构建立数学模型,确定增压压力和控制电磁阀占空比的关系. 采用PID (proportion-integral-derivative)控制方式控制输出占空比,使实际增压压力跟随目标增压压力. 实车试验结果表明,增压压力跟随效果良好,相比于预存脉谱式控制系统,压力偏差值变化更小且平稳,控制系统可行.

关键词: 能量守恒, 涡轮增压, PID(proportion-integral-derivative)控制

Abstract: Based on the physical model of the exhaust turbocharger control mechanism, the mathematical model for the turbine mechanism and the control mechanism is established by the energy balance equation and the force balance equation, which determines the relationship between the boost pressure and the duty cycle of the control solenoid valve. Using PID (proportion-integral-derivative) control mode to control the output duty cycle to make sure the actual boost pressure follows the target boost pressure. The vehicle road test results show that the boost control effect is good. Compared with the pre-pulse control system, the pressure deviation value changes more smoothly. The control system is feasible.

Key words: conservation of energy, turbocharger, PID (proportion integration differentiation) control

中图分类号: 

  • U463.1
[1] 王子缘, 张国庆, 高冠勇, 吕又付. 18650圆柱形电芯的产热行为研究[J]. 广东工业大学学报, 2017, 34(01): 45-49.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!