广东工业大学学报 ›› 2012, Vol. 29 ›› Issue (4): 90-95.doi: 10.3969/j.issn.1007-7162.2012.04.018

• 综合研究 • 上一篇    下一篇

毛细作用气液分离过程的理论分析

谭凯1，陈颖1，吴迪2,3   

  1. 1.广东工业大学 材料与能源学院，广东 广州 510006;2.清华大学 相变与界面传递现象实验室，3.热能工程系，北京 100084
  • 收稿日期:2012-02-18 出版日期:2012-12-25 发布日期:2012-12-25
  • 作者简介:谭凯（1985-）,男，硕士研究生，主要研究方向为相变换热、强化换热技术.
  • 基金资助:

    国家自然科学基金资助项目（U0934006）;粤港领域关键重点突破项目（2009Z011）

A Theoretical Analysis of the Capillary Effect on Liquid Vapor Separation

Tan Kai1, Chen Ying1, Wu Di2，3   

  1. 1. School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China;
    2. Lab of Phase Change and Interfacial Transport Phenomena, 3.Department of Thermal Engineering,Tsinghua University, Beijing 100084, China
  • Received:2012-02-18 Online:2012-12-25 Published:2012-12-25

HTML

PDF (PC)

2896

摘要： 针对分液冷凝换热器的毛细作用气液分离流动过程，建立了稳定流动情况下的一维数学模型.模型综合考虑了静压、重力、毛细压力、切应力的影响 ；考察了在稳定状态下孔径、孔数以及其组合方式对液膜高度的影响，同时还考察了入口干度和流量对液膜高度的影响；发现孔径和孔数对液膜高度影响基本相同，都是随着数值的增大而液膜高度减小.孔径为1.3 mm、孔数为8时液膜高度都分别为零，气液分离失效，但是干度和流量的对液膜高度影响趋势却相反.在干度为0.5、流量为0.058 kg/s时液膜高度也都分别为零，气液分离失效.

关键词: 气液分离；孔径；孔数；干度；流量；毛细作用

Abstract: To analyze the capillary effect on the liquid vapor separation in liquid vapor separation condenser, a mathematical model has been established. The effects of static pressure, gravitational force, capillary pressure and shear stress  were included in the model, and the effects of different orifice diameter, number, their combination, inlet quality and flow rate were researched. The results show that orifice diameter and orifice number have similar effects on performance. The liquid film height decreases while the diameter or number increases. The film height disappears when the diameter is 1.3 mm and the number is 8. But inlet flow rate and quality have opposite effects. The film height disappears when the quality is 0.5 and flow rate is 0.058 kg/s.

Key words: liquid vapor separation; orifice diameter; orifice number; quality; flow rate; capillary effect

No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发