广东工业大学学报 ›› 2014, Vol. 31 ›› Issue (1): 70-73.doi: 10.3969/j.issn.1007-7162.2014.01.014

• 综合研究 • 上一篇    下一篇

基于ZigBee的船用气囊压力采集系统

张秋伟，陈健，吴书全，刘国权   

  1. 广东工业大学 信息工程学院，广东 广州 510006
  • 收稿日期:2012-12-29 出版日期:2014-03-29 发布日期:2014-03-29
  • 作者简介:张秋伟（1986-），男，硕士研究生，主要研究方向为无线传感器网络.

The Pressure Acquisition System for Marine Airbags Based on ZigBee

Zhang Qiu-wei, Chen Jian, Wu Shu-quan, Liu Guo-quan   

  1. School of Information Engineering, Guangdong University of Technology, Guangzhou 510006，China
  • Received:2012-12-29 Online:2014-03-29 Published:2014-03-29

HTML

PDF (PC)

2909

摘要： 针对目前船用气囊压力监测的实现仅靠机械压力表的传统方式，提出并设计一种基于ZigBee无线技术的气体压力采集系统用于监测船用气囊的压力状况.该采集系统从功能上可划分为采集器、中继器、传感器节点等3部分，其硬件的实现主要是基于德州仪器公司的ZigBee片上系统CC2530芯片和飞思卡尔的气体压力传感器MPX5700；在软件设计上，基于TI公司的Z-Stack 2007 协议栈开发.测试结果表明：系统运行可靠，能满足系统设计要求和应用需求.

关键词: ZigBee;CC2530;船用气囊;压力传感器;Z-Stack 2007

Abstract: In view of the present marine airbags pressure monitoring method of using only the mechanical pressure gauge, it presents the design of a new wireless network gas pressure acquisition system, based on ZigBee, to monitor marine airbag pressure status. Functionally, the acquisition system can be divided into three parts: the collector, the repeater and the sensor node respectively. The system's hardware structure design was mainly based on the Texas Instrument's ZigBee chip CC2530 and Freescales gas pressure sensor MPX5700. The software design was based on the Z-Stack 2007 protocol of Texas Instrument. The test result shows that the system can function with great reliability, thus meeting the requirements for its design and application.

Key words: ZigBee; CC2530; marine airbags; pressure sensor; Z-Stack 2007

No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发