薄膜材料透气量系数拟合的研究与实现

广东工业大学学报 ›› 2007, Vol. 24 ›› Issue (2): 47-50.

薄膜材料透气量系数拟合的研究与实现

广东工业大学自动化学院；广东工业大学自动化学院广东广州510090；广东广州510090；

出版日期:2007-07-02 发布日期:2007-07-02

The Research and Application of Data Fitting in the Test of Gas Permeability of Film Material

(Faculty of Automation,Guangdong University of Technology,Guangzhou 510090,China)

Online:2007-07-02 Published:2007-07-02

摘要/Abstract

摘要： 薄膜材料在包装等行业的广泛应用,极大推动了其在各种环境下气体透过性能的研究.为求出在非标准环境下的透气量,提出了一种数据拟合的方法,该方法基于最小二乘法原则,采用matlab和vc混合编程,充分利用了两种工具的优点.

关键词: 薄膜；透气系数；数据拟合；

Abstract: With the rapid growth of application of film material in packing industry,the study on gas permeable ability in different kinds of condition is effectively pushed.In order to figure out the performance of gas permeability in nonstandard temperature,this paper introduces a new method of data fitting.It is based on least-square principle and matlab and visual c++ is used to mix programming,so that it can make good use of the two tools.The data fitting platform can perform widely,and it brings a va...

Key words: film； permeability； data fitting； forecast；

庞然；汪仁煌；龚雄文；谭义； . 薄膜材料透气量系数拟合的研究与实现[J]. 广东工业大学学报, 2007, 24(2): 47-50.

PANG Ran,WANG Ren-huang,GONG Xiong-wen,TAN Yi. The Research and Application of Data Fitting in the Test of Gas Permeability of Film Material[J]. Journal of Guangdong University of Technology, 2007, 24(2): 47-50.

参考文献

[1] 赵江. 压差法透气性测试的现状与发展[J]. 中国包装工业. 2005(07)

[2] 徐梅林. 特殊温度下材料阻隔性参数的获得方法——阻隔性参数拟合[J]. 包装工程. 2005(01)

[3] 陈光,任志良,孙海柱. 最小二乘曲线拟合及Matlab实现[J]. 兵工自动化. 2005(03)

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed