广东工业大学学报 ›› 2020, Vol. 37 ›› Issue (04): 75-78.doi: 10.12052/gdutxb.190135

• • 上一篇    下一篇

电火花钻削高精度盲孔实验研究

梁世雍, 于兆勤, 黄文彬, 肖成龙   

  1. 广东工业大学 机电工程学院，广东 广州 510006
  • 收稿日期:2019-10-20 出版日期:2020-07-11 发布日期:2020-07-02
  • 通信作者: 于兆勤(1960-)，男，教授，主要研究方向为超精密加工和先进制造技术，E-mail：zqyu@gdut.edu.cn E-mail:zqyu@gdut.edu.cn
  • 作者简介:梁世雍(1994-)，男，硕士研究生，主要研究方向为特种加工
  • 基金资助:
    国家自然科学基金资助项目(51675105)；广东省自然科学基金资助项目(2017A030313330)

A Research on EDM Drilling High Precision Blind Hole

Liang Shi-yong, Yu Zhao-qin, Huang Wen-bin, Xiao Cheng-long   

  1. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2019-10-20 Online:2020-07-11 Published:2020-07-02

HTML

PDF (PC)

2830

摘要： 针对电火花加工中电极损耗问题, 提出轴向补偿电极损耗的钻孔方法, 利用黄铜和紫铜2种不同电极材料在超精密电火花加工机床(Sarix SX-200hpm)上, 对钛合金进行不同深度盲孔加工实验, 对比了该法与电极损耗无补偿加工的差异。结果表明，利用该方法加工的盲孔深度能接近预期深度，且紫铜电极加工的盲孔形貌更好。

关键词: 电火花钻削, 轴向补偿, 高精度

Abstract: Aiming at the problem of electrode wear in electrical discharge machining(EDM), a drilling method for axial compensation of electrode wear is proposed. A series of blind holes of different intended depths are drilled on the micro-EDM machine (Sarix SX-200hpm) using the proposed method and they are compared with holes drilling without compensation. The brass and copper are employed as tool electrode and the workpiece is Titanium alloy (TC4). As a result the depth of blind hole processed by this method can be close to the expected and the morphology of blind hole processed with the copper electrode is better.

Key words: EDM drilling, axial compensation, high accuracy

中图分类号: 

  • TG661
[1] 颜宏, 张卫, 叶一东, 等. 用于共孔径相干合成的衍射光学元件设计[J]. 强激光与粒子束, 2015, 27(6): 6-11
YAN H, ZHANG W, YE Y D, et al. Design of diffractive optical elements for filled-aperture coherent beam combining [J]. High Power Laser and Particle Beams, 2015, 27(6): 6-11
[2] 赵丹, 刘存良, 朱惠人, 等. 涡轮叶片前缘对冲孔排气膜冷却特性的数值研究[J]. 航空动力学报, 2017, 32(11): 2609-2618
ZHAO D, LIU C L, ZHU H R, et al. Numerical studies on film cooling performance of turbine vane leading edge with counter-inclined structure [J]. Journal of Aerospace Power, 2017, 32(11): 2609-2618
[3] 周健豪, 盛雪爽, 杨海青, 等. 组喷孔喷嘴对双对置柴油机喷雾及燃烧的影响[J]. 航空动力学报, 2019, 34(1): 25-33
ZHOU J H, SHENG X S, YANG H Q, et al. Influence of group-hole nozzles on spray and combustion of an opposed piston opposed cylinder diesel engine [J]. Journal of Aerospace Power, 2019, 34(1): 25-33
[4] 宋永伟, 姚建丽. 微小孔钻削方法研究[J]. 航空制造技术, 2012, 410(14): 96-98
SONG Y W, YAO J L. Research on micro-hole drilling method [J]. Aeronautical Manufacturing Technology, 2012, 410(14): 96-98
[5] 黄海鹏, 李茂盛, 费翔, 等. 电火花加工用复杂电极形状精度检测研究[J]. 组合机床与自动化加工技术, 2017(9): 76-79
HUANG H P, LI M S, FEI X, et al. Accurate inspecting of tool-electrode with complicated shape for EDM [J]. Modular Machine Tool & Automatic Manufacturing Technique, 2017(9): 76-79
[6] BAMBERG E, HEAMAWATANACHAI S. Orbital electrode actuation to improve efficiency of drilling micro-holes by micro-EDM [J]. Journal of Materials Processing Technology, 2009, 209(4): 1826-1834
[7] RAVINDER K, INDERDEEP S. Productivity improvement of micro EDM process by improvised tool [J]. Precision Engineering, 2018, 51: 529-535
[8] RAVINDER K, INDERDEEP S. A modified electrode design for improving process performance of electric discharge drilling [J]. Journal of Materials Processing Technology, 2018, 264: 211-219
[9] FERRARIS E, CASTIGLIONI V, CEYSSENS F, et al. EDM drilling of ultra-high aspect ratio micro holes with insulated tools [J]. CIRP Annals-manufacturing Technology, 2013, 62(1): 191-194
[10] LEE C S, HEO E Y, KIM J M, et al. Electrode wear estimation model for EDM drilling [J]. Robotics and Computer-integrated Manufacturing, 2015, 36: 70-75
[11] 苟淞, 周加乐, 刘宏. 基于响应面的电火花加工盲孔深度的预测方法[J]. 科技创新导报, 2018, 15(14): 124-127
GOU S, ZHOU J L, LIU H. Prediction method of blind hole depth in EDM based on response surface [J]. Science and Technology Innovation Herald, 2018, 15(14): 124-127
[12] JEONG Y H, MIN B K. Geometry prediction of EDM-drilled holes and tool electrode shapes of micro-EDM process using simulation [J]. International Journal of Machine Tools and Manufacture, 2007, 47(12-13): 1817-1826
[13] ALIGIRI E, YEO S H, TAN P C. A new tool wear compensation method based on real-time estimation of material removal volume in micro-EDM [J]. Journal of Materials Processing Technology, 2010, 210(15): 2292-2303
[14] BLEYS P, KRUTH J P, LAUWERS B. Sensing and compensation of tool wear in milling EDM [J]. Journal of Materials Processing Technology, 2004, 149(1-3): 139-146
[15] NIRALA C K, SAHA P. Precise μEDM-drilling using real-time indirect tool wear compensation [J]. Journal of Materials Processing Technology, 2017, 240: 176-189
[16] MALAYATH G, KATTA S, AJAY M S, et al. Length-wise tool wear compensation for micro electric discharge drilling of blind holes [J]. Measurement, 2019, 134(12): 888-889
[1] 衡园, 吴建成, 杨志军. 基于FPGA的控制算法定点化设计[J]. 广东工业大学学报, 2020, 37(03): 55-58.
[2] 杨淑伶. 跳跃扩散下美式期权定价模型的高效算法[J]. 广东工业大学学报, 2018, 35(03): 87-89,112.
[3] 钟映春, 吕帅, 罗鹏, 简裕涛, 褚千琨. 烤瓷牙内部缺陷的图像检测及其特征统计分析[J]. 广东工业大学学报, 2018, 35(01): 1-5.
[4] 赖文敬, 周延周, 朱文卓, 鲍鸿. 一种基于棋盘格模板单目摄像机高精度标定方法[J]. 广东工业大学学报, 2015, 32(3): 79-84.
[5] 王婷婷, 苏成悦, 王娴, 周 镇. 基于多幅图像的有效点扩散函数的高精度测量[J]. 广东工业大学学报, 2010, 27(3): 51-55.
[6] 林钦畅； 杨福民； 谭德同； 汤文芳； 张忠萍； 邓幼俊； . 提高低轨道卫星预报精度的一个方法[J]. 广东工业大学学报, 2000, 17(1): 10-15.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发