基于可拓设计的驾驶人多模态情绪感知装置研究

doi:10.12052/gdutxb.200135

广东工业大学学报 ›› 2021, Vol. 38 ›› Issue (06): 98-102.doi: 10.12052/gdutxb.200135

基于可拓设计的驾驶人多模态情绪感知装置研究

费德意, 冯桑

广东工业大学机电工程学院，广东广州 510006

收稿日期:2020-10-13 出版日期:2021-11-10 发布日期:2021-11-09
通信作者: 冯桑(1973–)，男，副教授，博士，主要研究方向为汽车智能控制、可拓设计，E-mail：fengsang@gdut.edu.cn E-mail:fengsang@gdut.edu.cn
作者简介:费德意(1998–)，男，硕士研究生，主要研究方向为汽车智能网联技术、可拓设计
基金资助:
教育部产学合作协同育人项目(201901221008，201901241011)

An Analysis of Driver's Multimodal Emotion Perception Device Based on Extension Design

Fei De-yi, Feng Sang

School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China

Received:2020-10-13 Online:2021-11-10 Published:2021-11-09

摘要/Abstract

摘要： 为科学决策和评价驾驶人情绪感知装置的最优化多模态组合方案, 本文基于可拓设计多功能产品创造法, 利用基元理论中的发散分析法分析了情绪感知装置的检测功能, 建立了类物元，并生成具体产品物元模型。分析了单一检测装置包含的3种安装位置间的重组关系, 拓展出一系列重组方案, 再利用优度评价法对其进行筛选。最终确定了一种有效的多模态驾驶人情绪感知装置的组合方案。

关键词: 可拓设计, 安全驾驶, 情绪感知

Abstract: In order to scientifically evaluate and decide the optimal multimodal combination scheme of driver's emotion perception device, based on the extension design multi-functional product creation method, the detection function of emotion perception device is analyzed by using the divergence analysis method of basic element theory, and the matter-element like model of specific product established. The relationship between the three installation positions of a single detection device is analyzed, and a series of reorganization schemes are developed. The optimization evaluation method is used to screen them, and an effective combination scheme of multimodal driver emotion perception device is determined.

Key words: extension design, safe driving, emotion perception

中图分类号:

U471

费德意, 冯桑. 基于可拓设计的驾驶人多模态情绪感知装置研究[J]. 广东工业大学学报, 2021, 38(06): 98-102.

Fei De-yi, Feng Sang. An Analysis of Driver's Multimodal Emotion Perception Device Based on Extension Design[J]. Journal of Guangdong University of Technology, 2021, 38(06): 98-102.

参考文献

[1] 易慧, 陈瑞娟, 邓光华, 等. 基于心率变异性的情绪识别研究[J]. 生物医学工程研究, 2020, 39(2): 128-132.
YI H, CHEN R J, DENG G H, et al. Research on emotion recognition based on heart rate variability [J]. Journal of Biomedical Engineering Research, 2020, 39(2): 128-132.
[2] 钟铭恩, 吴平东, 彭军强, 等. 基于脑电信号的驾驶员情绪状态识别研究[J]. 中国安全科学学报, 2011, 21(9): 64-69.
ZHONG M E, WU P D, PENG J Q, et al. Study on an emotional state recognition technology based on drivers' EEGs [J]. China Safety Science Journal, 2011, 21(9): 64-69.
[3] SHARMA N, GEDEON T. Objective measures, sensors and computational techniques for stress recognition and classification: a survey [J]. Computer Methods & Programs in Biomedicine, 2012, 108(3): 1287-1301.
[4] 谢卓然, 马荣国, 宋鹏飞. 基于S5PV210芯片的驾驶员情绪感知系统设计[J]. 电子设计工程, 2015(19): 162-164.
XIE Z R, MA R G, SONG P F. Design of driver emotion perception system based on the S5PV210 chip [J]. Electronic Design Engineering, 2015(19): 162-164.
[5] 马兴民, 孙文财, 徐艺, 等. 驾驶员不良情绪状态检测系统的方法研究[J]. 吉林大学学报(信息科学版), 2015, 33(6): 680-684.
MA X M, SUN W C, XU Y, et al. Research on method of driver's negative emotions detection system [J]. Journal of Jilin University (Information Science Edition), 2015, 33(6): 680-684.
[6] 于申浩. 基于深度学习与信息融合的路怒情绪识别研究[D]. 济南: 山东大学, 2018.
[7] PORIA S, CAMBRIA E, BAJPAI R, et al. A review of affective computing: from unimodal analysis to multimodal fusion [J]. Information Fusion, 2017, 37: 98-125.
[8] 刘鹏. 融合面部表情和语音的驾驶员路怒症识别方法研究[D]. 镇江: 江苏大学, 2017.
[9] KATSIS C D, KATERTSIDIS N, GANIATSAS G, et al. Toward emotion recognition in car-racing drivers: a biosignal processing approach [J]. IEEE Transactions on Systems, Man, and Cybernetics—Part A: Systems and Humans, 2008, 38(3): 502-512.
[10] 杨春燕, 蔡文. 可拓学[M]北京: 科学出版社, 2014.
[11] 杨春燕. 可拓创新方法[M]. 北京: 科学出版社, 2016.
[12] 吴培旭, 刘建群. 基于可拓设计方法的多功能产品创造法[J]. 广东工业大学学报, 2015(3): 10-17.
WU P X, LIU J Q. Solution to creating multi-function product based on extension design methods [J]. Journal of Guangdong University of Technology, 2015(3): 10-17.
[13] 姚干勤, 薛澄岐. 基于相似案例的产品可拓重构设计方法[J]. 包装工程程, 2019, 40(14): 119-127, 161.
YAO G Q, XUE C Q. The design method of product extension reconfiguration based on similar cases [J]. Packaging Engineering, 2019, 40(14): 119-127, 161.
[14] 王体春, 秦家祺, 华洋. 基于可拓本体的复杂产品方案设计可拓集成框架研究[J]. 机电工程, 2020, 37(5): 461-470.
WANG T C, QIN J Q, HUA Y. Extension integration framework for complex product scheme design based on extension ontology [J]. Mechanical & Electrical Engineering Magazine, 2020, 37(5): 461-470.
[15] 李仔浩, 杨春燕. 基于逆向设计的产品可拓创意生成方法[J]. 机械设计, 2019, 36(12): 127-133.
LI Z H, YANG C Y. Product extension creative generation method based on reverse design [J]. Journal of Machine Design, 2019, 36(12): 127-133.
[16] 李仔浩, 杨春燕, 李文军. 可拓创新方法在发电机创新设计中的应用[J]. 广东工业大学学报, 2020, 37(1): 1-6.
LI Z H, YANG C Y, LI W J. An application of extension innovation method in generator innovation design [J]. Journal of Guangdong University of Technology, 2020, 37(1): 1-6.
[17] 郭恒发, 李兴森, 刘仁湖. 融合可拓学与TRIZ的产品设计创意生成方法——以手机充电器产品设计为例[J]. 广东工业大学学报, 2020, 37(5): 7-12.
GUO H F, LI X S, LIU R H. A creative generation method of product design based on extenics and TRIZ — taking the design of mobile phone charger as an example [J]. Journal of Guangdong University of Technology, 2020, 37(5): 7-12.
[18] 祁钰茜, 吴超仲, 高嵩, 等. 基于AHP和物元分析的愤怒驾驶状态辨识研究[J]. 交通信息与安全, 2015(2): 80-85.
QI Y Q, WU C Z, GAO S, et al. A study of angry driving identification based on AHP and matter element analysis [J]. Journal of Transport Information and Safety, 2015(2): 80-85.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

基于可拓设计的驾驶人多模态情绪感知装置研究

An Analysis of Driver's Multimodal Emotion Perception Device Based on Extension Design

HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

Metrics

本文评价

推荐阅读 0

[1]	郭恒发, 李兴森. 自动化立体仓库穿梭式货架的结构可拓设计[J]. 广东工业大学学报, 2022, 39(06): 123-129.
[2]	王体春, 许枫魁. 基于可拓理论的无人驾驶汽车内饰设计[J]. 广东工业大学学报, 2022, 39(02): 1-11.
[3]	吴培旭, 刘建群. 基于可拓设计方法的多功能产品创造法[J]. 广东工业大学学报, 2015, 32(3): 10-17.
[4]	罗良维, 杨春燕. 基于基因可拓模块化设计的陶瓷物流包装设计研究[J]. 广东工业大学学报, 2015, 32(2): 11-16.