广东工业大学学报 ›› 2023, Vol. 40 ›› Issue (05): 108-112.doi: 10.12052/gdutxb.220156
• 综合研究 • 上一篇
张广有, 苏国康, 李佳旺, 李俊飞, 唐有贵, 张永俊
Zhang Guang-you, Su Guo-kang, Li Jia-wang, Li Jun-fei, Tang You-gui, Zhang Yong-jun
摘要: 针对现有线切割脉冲电源对放电状态检测能力不足、输出具有滞后性等问题,研制了基于现场可编程门阵列 (Field Programmable Gate Array, FPGA) 的电火花线切割自整定脉冲电源。该电源将放电状态检测模块和波形调整模块集成在FPGA内部,避免了信号在不同器件间传输的延迟。通过高速A/D采样精准识别每个脉冲的放电情况,并根据不同放电状态实时调整脉冲输出频率,抑制有害放电状态,提高有效放电脉冲的比例。实验结果表明:与采用等频率脉冲电源加工相比,自整定脉冲电源有效提高了连杆双向同步切槽机床的加工效率。该脉冲电源促进了往复走丝线切割机床向高效节能和自动化方向发展。
中图分类号:
[1] 肖菊兰. 电火花脉冲电源研究现状及发展趋势[J]. 科技创新与应用, 2016, 5(36): 142. XIAO J L. Research status and development trend of EDM pulse power supply [J]. Technology Innovation and Application, 2016, 5(36): 142. [2] 梁世雍, 于兆勤, 黄文彬, 等. 电火花钻削高精度盲孔实验研究[J]. 广东工业大学学报, 2020, 37(4): 75-78. LIANG S Y, YU Z Q, HUANG W B, et al. A research on EDM drilling high precision blind hole [J]. Journal of Guangdong University of Technology, 2020, 37(4): 75-78. [3] 李佳旺. 连杆切槽机床控制系统及自调整脉冲电源研究[D]. 广州: 广东工业大学, 2022. [4] LIAO Y S, WOO J C. Design of a fuzzy controller for the adaptive control of WEDM process [J]. International Journal of Machine Tools and Manufacture, 2000, 40(15): 2293-2307. [5] DUTTA P, MAJUMDER M, PANJA S C. Optimization of material removal rate in wire EDM by polynomial neural network models [J]. Computational Intelligence, 2020, 36(2): 613-636. [6] 蒋毅, 赵万生, 顾琳. 微细电火花加工脉冲电源及其脉冲控制技术[J]. 上海交通大学学报, 2011, 45(11): 1684-1689. JIANG Y, ZHAO W S, GU L. Research on pulse generator and pulse control technology for micro electrical discharge machining [J]. Journal of Shanghai Jiao Tong University, 2011, 45(11): 1684-1689. [7] GHODSIYEH D, GOLSHAN A, IZMAN S. Multi-objective process optimization of wire electrical discharge machining based on response surface methodology [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, 36(2): 301-313. [8] 卢智良. 电流上升沿斜率对电极损耗影响[J]. 电加工, 1994, 29(2): 17-19. LU Z L. Effect of current rising slope on electrode loss[J]. Electromachining, 1994, 29(2): 17-19. [9] 凡银生. 电火花加工间隙放电特性及自适应与节能脉冲电源的研究[D]. 哈尔滨: 哈尔滨工业大学, 2017: 71. [10] 黄瑞宁, 刘兵, 楼云江. 基于模糊控制的微细电火花加工脉冲电源研究[J]. 中国机械工程, 2012, 23(14): 1718-1722. HUANG R N, LIU B, LOU Y J. Research on micro EDM pulse generator with fuzzy control [J]. China Mechanical Engineering, 2012, 23(14): 1718-1722. [11] 宋恩禹. 旋转超声振动辅助电火花加工自适应脉冲电源设计与实验研究[D]. 北京: 北方工业大学, 2020. [12] 苏国康, 李俊飞, 张永俊, 等. 连杆应力槽双向同步电火花线切割机床设计[J]. 机电工程, 2020, 37(8): 931-935. SU G K, LI J F, ZHANG Y J, et al. Two-way synchronous wire EDM machine for stress groove of connecting rod [J]. Journal of Mechanical and Electrical Engineering, 2020, 37(8): 931-935. [13] 潘红伟. 基于 FPGA 的往复走丝电火花线切割脉冲电源及高效加工研究[D]. 南京: 南京航空航天大学, 2018. [14] PURI A B, BHATTACHARYYA B. An analysis and optimization of the geometrical inaccuracy due to wire lag phenomenon in WEDM [J]. International Journal of Machine Tools and Manufacture, 2013, 2(43): 151-159. [15] 孙贺龙. 电火花小孔加工间隙状态检测及伺服控制系统研究[D]. 哈尔滨: 哈尔滨工业大学, 2017. [16] 官乐乐, 蒋毅, 赵万生, 等. 一种新型电火花线切割加工脉冲电源的设计[J]. 现代制造工程, 2019, 41(9): 94-99. GUAN L L, JIANG Y, ZHAO W S, et al. Design of a new wirecut electrical discharge machining pulse power [J]. Modern Manufacturing Engineering, 2019, 41(9): 94-99. [17] 王力, 连海山. 基于FPGA的绝缘陶瓷电火花加工脉冲电源的研制[J]. 机床与液压, 2021, 49(19): 88-93. WANG L, LIAN H S. Development of pulse power supply of insulated ceramics based on FPGA [J]. Machine Tool and Hydraulics, 2021, 49(19): 88-93. |
[1] | 张业强, 刘怡俊. DMA控制器在导航基带SoC中的应用[J]. 广东工业大学学报, 2016, 33(01): 36-39. |
[2] | 林小平, 鲁青, 郭伟, 邓杰航, 王超. 一种SmartFusion FPGA的快速语音合成系统设计[J]. 广东工业大学学报, 2014, 31(2): 43-48. |
[3] | 杜军特, 李扬. 参数自整定模糊PID控制方法及其在漆包机中的应用[J]. 广东工业大学学报, 2014, 31(2): 58-63. |
|