LogiX齿廓非圆齿轮的根切原理研究

广东工业大学学报 ›› 2006, Vol. 23 ›› Issue (3): 81-84.

LogiX齿廓非圆齿轮的根切原理研究

广东工业大学机电工程学院；广东工业大学机电工程学院广东广州510090；广东广州510090；

出版日期:2006-06-02 发布日期:2006-06-02

Study on Undercut Principle of Non-circular Gear with LogiX Profile

(Faculty of Electromechanical Engineering,Guangdong University of Technology,Guangzhou 510090,China)

Online:2006-06-02 Published:2006-06-02

摘要/Abstract

摘要： logiX齿轮是依据全新的齿形理论所提出的一种新型齿轮.当logiX齿廓应用于非圆齿轮时,能扩大非圆齿轮的应用领域.本文从共轭齿形的根切原理出发,依据logiX圆齿轮的根切原理,推导了logiX齿廓非圆齿轮不发生根切的条件表达式.为少齿数logiX齿廓非圆齿轮的设计提供了设计依据.

关键词: logiX齿廓；非圆齿轮；根切；

Abstract: LogiX gear is a new gear based on new tooth profile theory.When used in non-circular gear,logiX toothprofile can enlarge the gears’application area.This paper,based on the undercut theory of conjugate tooth profile,according to undercut theory of logiX circular gear,deduces condition expressions of logiX tooth profile non-circular gear under the condition that undercut is avoided.It provides the foundation for the design of the gear with small number of teeth.

Key words: logiX tooth profile； non-circular gear； undercut；

聂一彪；王英杰； . LogiX齿廓非圆齿轮的根切原理研究[J]. 广东工业大学学报, 2006, 23(3): 81-84.

NIE Yi-biao,WANG Ying-jie. Study on Undercut Principle of Non-circular Gear with LogiX Profile[J]. Journal of Guangdong University of Technology, 2006, 23(3): 81-84.

参考文献

[1] 李荣刚,李剑锋,冯显英. Logix齿轮的根切原理研究[J]. 山东轻工业学院学报(自然科学版). 2001(04)

[2] 赵韩,梁锦华,刘红雨,陈安适. 微线段齿廓的形成原理及特性[J]. 机械工程学报. 1997(05)

[1] 吴序堂,王贵海编著.非圆齿轮及非匀速比传动[M]. 机械工业出版社, 1997

[1] Komori T,Ariga Y,Nagata S.A new gear profile having zero relative curvature at many contact points. Transactions of the ASME . 1990

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed