广东工业大学学报 ›› 2019, Vol. 36 ›› Issue (06): 74-79.doi: 10.12052/gdutxb.190095

• 综合研究 • 上一篇    下一篇

基于信号完整性的高速PCB优化设计与研究

袁为群1, 宋建远1, 陈世荣2   

  1. 1. 崇达技术股份有限公司, 广东 深圳 518132;
    2. 广东工业大学 轻工化工学院, 广东 广州 510090
  • 收稿日期:2019-07-12 出版日期:2019-11-28 发布日期:2019-11-28
  • 作者简介:袁为群(1975-),男,高级工程师,硕士,主要研究方向为PCB高频高速、5G、微波天线、信号完整性等.

Research and Optimization Design of High-speed PCB Based on Signal Integrity

Yuan Wei-qun1, Song Jian-yuan1, Chen Shi-rong2   

  1. 1. Suntak Technology Co., LTD., Shenzhen 518132, China;
    2. School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510090, China
  • Received:2019-07-12 Online:2019-11-28 Published:2019-11-28

HTML

PDF (PC)

3008

摘要： 印制电路板（Printed Circuit Board，PCB）设计者因缺少PCB制造经验而难以系统、全面和创造性地考虑高速电路的信号完整性问题，本文运用信号完整性相关理论知识全面分析和解决高速PCB设计过程中遇到的问题.以高速PCB的设计和制造为例，利用信号完整性分析方法将地层铜桥、差分线和导通孔设计与高速电路的特征和实际制造工艺相结合，创造性地把外层差分微带线通过盲孔转移到内层带状线，找到优化设计的解决方案.实例显示，把信号完整性分析与高速PCB可制造性相结合，能够有效地解决高速PCB的信号失真问题，一定程度上优化了高速电路的设计及缩短了产品的开发周期.

关键词: 高速PCB, 信号完整性, 阻抗控制, 带状线

Abstract: Due to the lack of the PCB (Printed Circuit Board) manufacturing experience, it is difficult for designers to consider the problem of signal integrity for high-speed PCB systematically, comprehensively and innovatively. The theory of signal integrity is used to comprehensively analyze the contradictions encountered in the design process, so as to solve the contradictory problems more effectively. Taking the problems encountered in PCB design and fabrication as examples, the method of signal integrity analysis is used to combine the design of copper bridge, differential trace and via holes with the feature of high-speed circuit and manufacturing process, and optimal solution is obtained by the extension innovation of transferring the differential traces from external layer micro-strip to the internal layer strip-line by blind holes. From the examples, it can be found that the signal distortion problem of high-speed PCB can be effectively solved by combining signal integrity analysis and design of manufacturing, and thus the high-speed circuit design and product development cycle is greatly optimized.

Key words: high-speed Printed Circuit Board (PCB), signal integrity, impedance controlled, stripline

中图分类号: 

  • TN41
[1] 龚永林. 2018年印制电路技术热点[J]. 印制电路信息, 2019, 27(2):1-8 GONG Y L. The hotspots of printed circuit technology in 2018[J]. Printed Circuit Information, 2019, 27(2):1-8
[2] 赵辰阳, 王立德, 李召召. 高速数字PCB板设计中的信号完整性研究[J]. 自动化与仪器仪表, 2018(9):1-4 ZHAO C Y, LI L D, LI Z Z. Research on signal integrity in high speed digital PCB board design[J]. Automation & Instrumentation, 2018(9):1-4
[3] 李双力. 基于高速数字电路中的信号完整性分析[J]. 信息通信, 2016(8):231-232
[4] 郑常斌. PCB信号完整性分析与设计[D]. 北京:北京邮电大学, 2008.
[5] 秦德淳, 陈雷, 蒲有珠. 基于信号完整性分析的阻抗匹配问题研究[J]. 科学技术与工程, 2008, 18(4):1052-1055 QIN D C, CHEN L, PU Y Z. Method research of impedance matching based on analysis of signal integrity[J]. Science Technology and Engineering, 2008, 18(4):1052-1055
[6] 王磊. 高速PCB设计中影响信号完整性的因素及解决方案[J]. 数字技术与应用, 2015, 33(4):51-52
[7] 张华. 高速互连系统的信号完整性研究[D]. 南京:东南大学, 2005.
[8] 滕丽. 一种高速互连通道的信号完整性仿真研究[J]. 电子与封装, 2018, 18(12):37-40 TENG L. A study on SI simulation of a high-speed interconnection channel[J]. Electronics &Packaging, 2018, 18(12):37-40
[9] DOUGLAS B. 信号完整性问题和印制电路板设计[M]. 刘雷波, 赵岩, 译. 北京:电子工业出版社, 2005:83-87.
[10] 袁为群. 应用于超级计算的高速电路板制作技术研究[J]. 香港线路板会刊, 2019(71):26-38 YUAN W Q. Research on high-speed PCB manufacturing technology applied on supercomputing[J]. Journal of the HKPCA, 2019(71):26-38
[11] ERIC B. 信号完整性分析[M]. 李玉山, 李丽平, 等译. 北京:电子工业出版社, 2005:48-50.
[12] 张希军, 杨洁, 王振兴, 等. 微带线在快速脉冲防护器件性能测试中的应用[J]. 广东工业大学学报, 2011, 28(3):21-23 ZHANG X J, YANG J, WANG Z X, et al. The Application of Microstrip Transmission Lines in Performance Tests on EMP Protection Devices[J]. Journal of Guangdong University of Technology, 2011, 28(3):21-23
[13] 唐玉坤, 文泽生, 李长生. 高速PCB信号完整性设计及制造简述[J]. 印制电路信息, 2012, 20(12):21-24 TANG Y K, WEN Z S, LI C S. Brief introduction of signal integrity design and manufacturing[J]. Printed Circuit Information, 2012, 20(12):21-24
[14] 贺娇. 高速PCB板传输线信号完整性分析[D]. 武汉:华中科技大学, 2015.
[15] 莫剑冬, 谢永超, 王建甫. 过孔特性阻抗分析及其对信号质量的影响[J]. 机电元件, 2015, 35(2):32-51
[16] 麻勤勤, 石和荣, 孟宏峰. 基于SIwave和Designer的差分过孔仿真分析[J]. 电子测量技术, 2016, 39(1):40-53 MA Q Q, SHI H R, MENG H F. Simulation analysis of differential via based on SIwave and Designer[J]. Electronic Measurement Technology, 2016, 39(1):40-53
[17] 王红飞, 李志东, 乔书晓. 过孔阻抗控制及其对信号完整性的影响[J]. 印制电路信息, 2012, 20(4):74-78 WANG H F, LI Z D, QIAO S X. Impedance control of vias and its impact on signal integrity[J]. Printed Circuit Information, 2012, 20(4):74-78
No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2017 《广东工业大学学报》编辑部
地址：广州市东风东路729号广东工业大学 邮编：510090
电话：020-37626653,020-37626139,020-37626396
邮箱：xbzrb@gdut.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发