一种新型LED平面光源的研究

doi:10.12052/gdutxb.160033

广东工业大学学报 ›› 2017, Vol. 34 ›› Issue (01): 65-70,77.doi: 10.12052/gdutxb.160033

一种新型LED平面光源的研究

王能获¹, 赵韦人¹, 陈均华¹, 孟盈君¹, 周益羊¹, 张欣²

1. 广东工业大学物理与光电工程学院, 广东广州 510006;
2. 广东工业大学艺术设计学院, 广东广州 510090

收稿日期:2016-03-07 出版日期:2017-01-09 发布日期:2017-01-09
通信作者: 赵韦人(1965-),男,教授,主要研究方向为稀土发光材料、LED封装、LED照明等.E-mail:zwrab@163.com E-mail:zwrab@163.com
作者简介:王能获(1989-),男,硕士研究生,主要研究方向为LED封装、LED照明.
基金资助:
广东省科技计划项目（2013B061000008）；广东省创新方法与决策管理系统重点实验室（501120040）

A novel LED plane light source

Wang Neng-huo¹, Zhao Wei-ren¹, Chen Jun-hua¹, Meng Ying-jun¹, Zhou Yi-yang¹, Zhang Xin²

1. School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006, China;
2. School of Art & Design, Guangdong University of Technology, Guangzhou 510090, China

Received:2016-03-07 Online:2017-01-09 Published:2017-01-09

摘要/Abstract

摘要：

研究一种新型隔离封装方式制作的LED平面光源.采用高反射率铝板或导光板制作荧光板，用蓝光芯片条在荧光板侧面激发荧光板中的荧光粉实现白光发射.研究表明，该方法不仅制作工艺简单，而且有助于减少荧光粉对光的散射，提高出光效率，提高出光均匀度.通过蓝光的入射角的变化，这种方式能方便调节荧光粉的吸收截面和出射光谱，实现了95以上的高显色指数，同时真正实现了芯片和荧光粉的远离.

关键词: LED封装, 白光LED, 面光源

Abstract:

A novel LED plane light source is studied in the paper. With the fluorescence plate manufactured through high-reflection aluminum board and the blue light LED chip strips, white light emission is realized. Theoretic analysis show that the light-output efficiency of the LED sources can be increased through the coincidence of the light-excited surface of the fluorescence layer and the light output surface of the layer; the epoxy coating on phosphor particles can reduce the incident intensity of blue light to the phosphors, while the uncoated phosphor particles have the higher blue-fluorescence converting efficiency. Light output efficiency can also be raised by the high reflectivity of the substrate of fluorescence epoxy layer. With the help of the light guide plate dots, the light output homogeneous of the plane source can be realized. The absorption cross section and the emission spectrum of the plane source can be adjusted through the change of incident angle of blue light, and high color render index above 95 can be obtained. Furthermore, the isolation between LED chips and phosphors is realized. The light efficiency of the plane sources can be further enhanced through the optimization design and manufacture process, and reaches the commercialization.

Key words: LED package, white light LED, panel light

中图分类号:

O482

王能获, 赵韦人, 陈均华, 孟盈君, 周益羊, 张欣. 一种新型LED平面光源的研究[J]. 广东工业大学学报, 2017, 34(01): 65-70,77.

Wang Neng-huo, Zhao Wei-ren, Chen Jun-hua, Meng Ying-jun, Zhou Yi-yang, Zhang Xin. A novel LED plane light source[J]. Journal of Guangdong University of Technology, 2017, 34(01): 65-70,77.

参考文献

[1] 闫国栋. 大功率LED集成光源的二次光学系统设计方法研究[D]. 广州:广东工业大学信息工程学院, 2013.
[2] QITU Z, LE Z, PENGDE H, et al. Light converting inorganic phosphors for white light-emitting diodes[J]. Progress in Chemistry, 2011, 23(6):1108-1122.
[3] YE S, XIAO F, PAN Y X, et al. Phosphors in phosphor-converted white light-emitting diodes:Recent advances in materials, techniques and properties[J]. Materials Science and Engineering, 2010, 71(1):1-34.
[4] 李楠, 潘永雄, 苏成悦, 等. 基于时间混色方式的冷暖双色LED调光调色光源[J]. 广东工业大学学报, 2016, 33(1):77-82. LI N, PAN Y X, SU C Y, et al. A dimming lighting based on cold and warm white LEDs in time hybrid color mode[J]. Journal of Guangdong University of Technology, 2016, 33(1):77-82.
[5] 苏永道, 吉爱华, 赵超. LED封装技术[M]. 上海:上海交通大学出版社, 2010:121-131.
[6] 颜重光. 技术创新的LED灯丝球泡灯[J]. 中国电子商情:基础电子, 2013(10):62-64. YAN C G. Technological innovation of LED filament bulb[J]. China Light & Lighting, 2013(10):62-64.
[7] 龚三三, 秦会斌, 刘丹. 高光效LED灯丝球泡灯的光学性能研究[J]. 半导体技术, 2015, 40(2):112-116. GONG S S, QIN H B, LIU D. Study on optical performanceof high luminous LED filament bulbs[J]. Semiconductor Technology, 2015, 40(2):112-116.
[8] 李建海. 基于COB封装结构功率LED热仿真研究[D]. 哈尔滨:哈尔滨理工大学自动化学院, 2014.
[9] 杨亮. 荧光粉玻璃复合材料的制备, 表征及其在大功率LED中的应用[D]. 武汉:华中科技大学机机械科学与工程学院:2013.
[10] ZHANG J C, LONG Y Z, ZHANG H D, et al. Eu²⁺/Eu³⁺-emission-ratio-tunable CaZr(PO₄)₂:Eu phosphors synthesized in air atmosphere for potential white light-emitting deep UV LEDs[J]. Journal of Materials Chemistry C, 2014, 2(2):312-318.
[11] TIAN B, CHEN B, TIAN Y, et al. Excitation pathway and temperature dependent luminescence in color tunable Ba₅Gd₈Zn₄O₂₁:Eu³⁺ phosphors[J]. Journal of Materials Chemistry C, 2013, 1(12):2338-2344.
[12] 谢志国, 李伟平, 李程, 等. 亮度均匀的LED路灯透镜设计与研究[J]. 光学与光电技术, 2012, 10(5):84-88. XIE Z G, LI W P, LI C, et al. LED streetlight lens design and research base on luminance uniform distribution[J]. Optics & Optoelectronic Technology, 2012, 10(5):84-88.
[13] 梁德娟, 庄其仁, 智佳军, 等. 侧人式无导光板LED平板灯的设计与实现[J]. 光电子·激光, 2014, 25(3):465-471. LIANG D J, ZHUANG Q R, ZHI J J, et al. Design and realization of edge-lighting LED flat panal light with no LGP[J]. Journal of Optoelectronics·Laser, 2014, 25(3):465-471.
[14] 林晓新, 项颖, 庞晓峰. 侧入式LED背光源导光板网点设计与仿真[J]. 广东工业大学学报, 2014, 31(4):95-99. LIN X X, XIANG Y, PANG X F. Design and simulation of scattering netted dots on light guide plate of side-incident LED backlight[J]. Journal of Guangdong University of Technology, 2014, 31(4):95-99.
[15] 祁姝琪. LED芯片的COB封装技术[D]. 杭州:杭州电子科技大学电子信息学院, 2013.
[16] 张力. LED芯片及LED灯具的光学模拟和测试[D]. 武汉:华中科技大学光学与电子信息学院, 2011.
[17] 宋国华, 缪建文, 徐淑武, 等. YAG:Ce³⁺玻璃陶瓷白光LED的发光特性[J]. 光电子·激光, 2010, 21(12):1785-1789. SONG G H, MIAO J W, XU S W, et al. Photoluminescence properties of the Ce³⁺ doped yttrium aluminum garnet glass-ceramic white LED[J]. Journal of Optoelectronics·Laser, 2010, 21(12):1785-1789.
[18] 梁韵玲, 张伟, 胡正发, 等. 镓取代掺铈YAG荧光粉的合成机理及性能研究[J]. 广东工业大学学报, 2015, 32(1):24-28. LIANG Y L, ZHANG W, HU Z F, et al. Synthesis mechanism and properties of gallium substituted YAG:Ce phosphors[J]. Journal of Guangdong University of Technology, 2015, 32(1):24-28.
[19] 方夏冰, 赵韦人, 邓玲玲, 等. 低温空气中Ba_3-xP₄O₁₃:xEu²⁺黄白色长余辉荧光粉的制备和发光性能研究[J]. 广东工业大学学报, 2014, 31(2):121-127. FANG X B, ZHAO W R, DENG L L, et al. Preparation and luminescent properties of Ba3-xP4O13:xEu2+ yellow-white long afterglow phosphors in the air atmosphere at a low temperature[J]. Journal of Guangdong University of Technology, 2014, 31(2):121-127.
[20] 刘宗源. 大功率LED封装设计与制造的关键问题研究[D]. 武汉:华中科技大学机械科学与工程学院, 2010.
[21] 秦宗. 大尺寸高性能LED背光模组关键技术研究[D]. 武汉:华中科技大学机械科学与工程学院, 2013.
[22] 张奇辉. 大功率LED照明系统光学设计方法研究[D]. 广州:华南理工大学物理与光电工程学院, 2010.
[23] 张康, 苏成悦, 付倩, 等. 基于均匀照明的光学器件研究[J]. 广东工业大学学报, 2013(1):87-91. ZHANG K, SU C Y, FU Q, et al. Research into optical device based on uniform illumination[J]. Journal of Guangdong University of Technology, 2013(1):87-91.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

一种新型LED平面光源的研究

A novel LED plane light source

HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

Metrics

本文评价

推荐阅读 0

[1]	何景祺, 罗莉. 新型近紫外激发单一基质荧光粉Sr₂V₂O₇:Ln(Ln=Eu³⁺, Dy³⁺, Sm³⁺, Tb³⁺)的研究[J]. 广东工业大学学报, 2019, 36(01): 68-74.
[2]	邓玲玲,赵韦人,方夏冰. 荧光粉Ba_3-x-yP₄O₁₃:xCe³⁺,yTb³⁺的光谱分析[J]. 广东工业大学学报, 2013, 30(2): 28-32.