聚酰亚胺基复合材料在电池电极中的研究进展

doi:10.12052/gdutxb.210060

Abstract

Abstract: Polyimide (PI) is a polymer synthesized by thermal imination of dianhydride and diamine as raw materials. As a battery electrodes material, it boasts high theoretical capacity, high mechanical strength and easy recovery. However, its insulation limits the utilization rate of internal active sites, resulting in poor rate performance of the battery. A research review is conducted concerning the improvement of the structural stability through enlarging conjugate structure and the introduction of more carbonyl structure (C=O) to increase PI redox center site. In order to obtain higher battery capacity, PI, carbide and graphene combination, the hybridization of carbon nanotubes and the electrostatic spinning process are applied to improve electrochemical performance of battery electrode. The research of other materials based on PI is summarized as well. And the current research direction of PI is prospected.

Key words: polyimide, carbon material, electrode, carbonization, hybridization

CLC Number:

TQ323.7

Liu Cun-sheng, Liu Yi-dong, Liao Song-yi, Huang Xing-wen, Li Qing-ling, Song Dao-yuan, Min Yong-gang. Research Progress of Polyimide-based Composite Materials in Battery Electrodes[J].Journal of Guangdong University of Technology, 2022, 39(03): 125-132.

References

[1] WENG W, KURIHARA R, WANG J, et al. Electrospun carbon nanofiber-based composites for lithium-ion batteries: structure optimization towards high performance [J]. Composites Communications, 2019, 15: 135-148.
[2] 李新喜, 袁晓娇, 张国庆, 等. 锂离子电池硅/石墨复合负极材料的制备及性能研究[J]. 广东工业大学学报, 2014, 31(2): 27-31.
LI X X, YUAN X J, ZHANG G Q, et al. Preparation and properties of silicon/graphite composites as anode materials for lithium batteries [J]. Journal of Guangdong University of Technology, 2014, 31(2): 27-31.
[3] WANG L, LIU F, SHAO W, et al. Graphite oxide dopping polyimide nanofiber membrane via electrospinning for high performance lithium ion batteries [J]. Composites Communications, 2019, 16: 150-157.
[4] LI L, CHEN Y, YU T, et al. Preparation of polylactic acid/TEMPO-oxidized bacterial cellulose nanocomposites for 3D printing via Pickering emulsion approach [J]. Composites Communications, 2019, 16: 162-167.
[5] ZHAO Q, LU Y, CHEN J. Advanced organic electrode materials for rechargeable sodium-ion batteries [J]. Advanced Energy Materials, 2017, 7(8): 1601792.
[6] 胡季清. 锂离子电池用聚酰亚胺活性物质及粘结剂的研究[D]. 广州: 华南理工大学, 2019.
[7] 朱丽. 高性能聚酰亚胺粘结剂在锂离子电池硅负极中的研究[D]. 南昌: 江西师范大学, 2016.
[8] 王林林. 聚酰亚胺纳米纤维膜的制备及作为锂电池隔膜的研究[D]. 郑州: 中原工学院, 2020.
[9] LI L, LIU P, FU Q S, et al. Study on preparation of polyacrylonitrile/polyimide composite lithium-ion battery separator by electrospinning [J]. Journal of Materials Research, 2019, 34(4): 642-651.
[10] SONG Z, ZHAN H, ZHOU Y. Polyimides: promising energy-storage materials [J]. Angew Chem Int Ed Engl, 2010, 49(45): 8444-8448.
[11] PARK J H, KIM J M, KIM J S, et al. Polyimide/carbon black composite nanocoating layers as a facile surface modification strategy for high-voltage lithium ion cathode materials [J]. Journal of Materials Chemistry A, 2013, 1(40): 12441-12447.
[12] LEE M, HONG J, KIM H, et al. Organic nanohybrids for fast and sustainable energy storage [J]. Advanced Materials, 2014, 26(16): 2558-2565.
[13] WANG H G, YUAN S, MA D L, et al. Tailored aromatic carbonyl derivative polyimides for high-power and long-cycle sodium-organic batteries [J]. Advanced Energy Materials, 2014, 4(7): 1301651.
[14] SONG Z, XU T, GORDIN M L, et al. Polymer-graphene nanocomposites as ultrafast-charge and discharge cathodes for rechargeable lithium batteries [J]. Nano Lett, 2012, 12(5): 2205-2211.
[15] WANG Z, ZHANG B, ZHANG Y, et al. A novel π-conjugated poly(biphenyl diimide) with full utilization of carbonyls as a highly stable organic electrode for Li-ion batteries [J]. RSC Advances, 2020, 10(52): 31049-31055.
[16] HE J, LIAO Y, HU Q, et al. Multi carbonyl polyimide as high capacity anode materials for lithium ion batteries [J]. Journal of Power Sources, 2020, 451: 227792.
[17] WANG J, YAO H, DU C, et al. Polyimide schiff base as a high-performance anode material for lithium-ion batteries [J]. Journal of Power Sources, 2021, 482: 228931.
[18] LI J, LUO M, BA Z, et al. Hierarchical multicarbonyl polyimide architectures as promising anode active materials for high-performance lithium/sodium ion batteries [J]. Journal of Materials Chemistry A, 2019, 7(32): 19112-19119.
[19] HERNÁNDEZ G, SALSAMENDI M, MOROZOVA S M, et al. Polyimides as cathodic materials in lithium batteries: effect of the chemical structure of the diamine monomer [J]. Journal of Polymer Science Part A:Polymer Chemistry, 2018, 56(7): 714-723.
[20] LIU X, QIU S, MEI P, et al. Chain structure-dependent electrochemical performance of polyimide cathode materials for lithium-ion batteries [J]. Journal of Materials Science, 2020, 56(5): 3900-3910.
[21] BA Z, WANG Z, LUO M, et al. Benzoquinone-based polyimide derivatives as high-capacity and stable organic cathodes for lithium-ion batteries [J]. ACS Appl Mater Interfaces, 2020, 12(1): 807-817.
[22] LI Z, ZHOU J, XU R, et al. Synthesis of three dimensional extended conjugated polyimide and application as sodium-ion battery anode [J]. Chemical Engineering Journal, 2016, 287: 516-522.
[23] ZHANG Q, LIN G, HE Y, et al. Chain engineering-tailored microstructures and lithium storage performance of hydrothermally-synthesized linear polyimides [J]. Materials Today Chemistry, 2020, 17: 100341.
[24] JUNG M H, GHORPADE R V. Polyimide containing tricarbonyl moiety as an active cathode for rechargeable Li-ion batteries [J]. Journal of The Electrochemical Society, 2018, 165(11): A2476-A2482.
[25] 李珺, 赵昕, 巴兆虎, 等. 多羰基聚酰亚胺正极材料的制备及其电化学性能[J]. 东华大学学报(自然科学版), 2020, 46(3): 383-390.
LI J, ZHAO X, BA Z H, et al. Preparation and electrochemical properties of multicarbonyl polyimide cathode materials [J]. Journal of Donghua University (Natural Science), 2020, 46(3): 383-390.
[26] YANG H, LIU S, CAO L, et al. Superlithiation of non-conductive polyimide toward high-performance lithium-ion batteries [J]. Journal of Materials Chemistry A, 2018, 6(42): 21216-21224.
[27] LIU S, YANG H, SUI L, et al. Self-adhesive polyimide (PI)@reduced graphene oxide (RGO)/PI@carbon nano-tube (CNT) hierarchically porous electrodes: maximizing the utilization of electroactive materials for organic Li ion batteries [J]. Energy Technology, 2020, 8(9): 2000397.
[28] LYU H, LI P, LIU J, et al. Aromatic polyimide/graphene composite organic cathodes for fast and sustainable lithium-ion batteries [J]. ChemSusChem, 2018, 11(4): 763-772.
[29] MENG Y, WU H, ZHANG Y, et al. A flexible electrode based on a three-dimensional graphene network-supported polyimide for lithium-ion batteries [J]. J Mater Chem A, 2014, 2(28): 10842-10846.
[30] AHMAD A, WU H, GUO Y, et al. A graphene supported polyimide nanocomposite as a high performance organic cathode material for lithium ion batteries [J]. RSC Advances, 2016, 6(40): 33287-33294.
[31] HUANG Y, LI K, LIU J, et al. Three-dimensional graphene/polyimide composite-derived flexible high-performance organic cathode for rechargeable lithium and sodium batteries [J]. Journal of Materials Chemistry A, 2017, 5(6): 2710-2716.
[32] CHANG B, MA J, JIANG T, et al. Reduced graphene oxide promoted assembly of graphene@polyimide film as a flexible cathode for high-performance lithium-ion battery [J]. RSC Advances, 2020, 10(15): 8729-8734.
[33] WU H P, YANG Q, MENG Q H, et al. A polyimide derivative containing different carbonyl groups for flexible lithium ion batteries [J]. Journal of Materials Chemistry A, 2016, 4(6): 2115-2121.
[34] GU T, ZHOU M, LIU M, et al. A polyimide–MWCNTs composite as high performance anode for aqueous Na-ion batteries [J]. RSC Advances, 2016, 6(58): 53319-53323.
[35] WU H, SHEVLIN S A, MENG Q, et al. Flexible and binder-free organic cathode for high-performance lithium-ion batteries [J]. Adv Mater, 2014, 26(20): 3338-3343.
[36] WANG G, CHANDRASEKHAR N, BISWAL B P, et al. A crystalline, 2D polyarylimide cathode for ultrastable and ultrafast Li storage [J]. Adv Mater, 2019, 31(28): e1901478.
[37] LIU N, LIU Y, ZHAO Y, et al. CNT-intertwined polymer electrode toward the practical application of wearable devices [J]. ACS Appl Mater Interfaces, 2019, 11(50): 46726-46734.
[38] WANG J G, YANG Y, HUANG Z H, et al. MnO-carbon hybrid nanofiber composites as superior anode materials for lithium-ion batteries [J]. Electrochimica Acta, 2015, 170: 164-170.
[39] ZHAO F, ZHAO X, PENG B, et al. Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries [J]. Chinese Chemical Letters, 2018, 29(11): 1692-1697.
[40] ZHANG F, ALHAJJI E, LEI Y, et al. Highly doped 3D graphene Na-ion battery anode by laser scribing polyimide films in nitrogen ambient [J]. Advanced Energy Materials, 2018, 8: 1800353.
[41] LIU Q, XIAO Z, CUI X, et al. In-situ confinement of ultrasmall SnO₂ nanocrystals into redox-active polyimides for high-rate and long-cycling anode materials [J]. Composites Communications, 2021, 23: 100561.
[42] WANG S, LEE P K, YANG X, et al. Polyimide-cellulose interaction in Sb anode enables fast charging lithium-ion battery application [J]. Materials Today Energy, 2018, 9: 295-302.
[43] NAN D, WANG J G, HUANG Z H, et al. Highly porous carbon nanofibers from electrospun polyimide/SiO₂ hybrids as an improved anode for lithium-ion batteries [J]. Electrochemistry Communications, 2013, 34: 52-55.
[44] ZHOU J, YU X, ZHOU J, et al. Polyimide/metal-organic framework hybrid for high performance Al-organic battery [J]. Energy Storage Materials, 2020, 31: 58-63.
[45] SHEN J, HU W, LI Y, et al. Fabrication of free-standing N-doped carbon/TiO₂ hierarchical nanofiber films and their application in lithium and sodium storages [J]. Journal of Alloys and Compounds, 2017, 701: 372-379.
[46] REDDY A L M, SRIVASTAVA A, GOWDA S R, et al. Synthesis of nitrogen-doped graphene films for lithium battery application [J]. ACS Nano, 2010, 4(11): 6337-6342.
[47] WANG Y, LI Y, MAO S S, et al. N-doped porous hard-carbon derived from recycled separators for efficient lithium-ion and sodiumion batteries [J]. Sustainable Energy & Fuels, 2019, 3(3): 717-722.
[48] WU Q, LIU J, YUAN C, et al. Nitrogen-doped 3D flower-like carbon materials derived from polyimide as high-performance anode materials for lithium-ion batteries [J]. Applied Surface Science, 2017, 425: 1082-1088.
[49] ZHANG G, XU Z, LIU P, et al. A facile in-situ polymerization strategy towards polyimide/carbon black composites as high performance lithium ion battery cathodes [J]. Electrochimica Acta, 2018, 260: 598-605.
[50] MA L, LU D, YANG P, et al. Solution-processed organic PDI/CB/TPU cathodes for flexible lithium ion batteries [J]. Electrochimica Acta, 2019, 319: 201-209.
[51] AMIN K, MENG Q, AHMAD A, et al. A carbonyl compound-based flexible cathode with superior rate performance and cyclic stability for flexible lithium-ion batteries [J]. Advanced Materials, 2018, 30(4): 1703868.
[52] CHENG Q, WU M, LI M, et al. Ultratough artificial nacre based on conjugated cross-linked graphene oxide [J]. Angewandte Chemie, 2013, 125(13): 3838-3843.
[53] LI N, CHEN Z, REN W, et al. Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates [J]. Proceedings of the National Academy of Sciences, 2012, 109(43): 17360-17365.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

Research Progress of Polyimide-based Composite Materials in Battery Electrodes

HTML

PDF (PC)

Abstract

Cite this article

share this article

References

Related Articles 11

Metrics

Comments

Recommended 0

[1]	Yu Wen-tao, Song Jian-yuan, Fang Ji-yong, Liu Yi-dong, Liu Cun-sheng, Min Yong-gang. Research and Application Progress of Composite Polyimide with Low Dielectric Properties [J]. Journal of Guangdong University of Technology, 2023, 40(01): 122-129.
[2]	Zhuang Chu-nan, Xu Jia-xiong, Lin Jun-hui. Numerical Analysis of Contact Characteristics between CZTSSe Thin Film and Mo Back Electrode [J]. Journal of Guangdong University of Technology, 2020, 37(03): 106-113.
[3]	Zeng Li-zhen, He Miao. Application of Carbonized Waste Cotton Textiles as Electrode in Microbial Fuel Cells [J]. Journal of Guangdong University of Technology, 2018, 35(04): 111-118.
[4]	Sun Mei-hua, Chen Qian. A Comparison of Ion Chromatography Method with Ion Selective Electrode Method in the Detection of Chlorides in Water [J]. Journal of Guangdong University of Technology, 2017, 34(04): 36-40.
[5]	WANG Chang-Hong， HUANG Jiong-Tong， ZENG Wen-Qiang. Numerical Simulation and Analysis of Heat Transfer Characteristics in Electrode of Spot Welding for High Melting Steel [J]. Journal of Guangdong University of Technology, 2016, 33(03): 6-10.
[6]	QU Guang-Zhou1, LI Jie2. A Study of the Discharge Characteristics and Influence Factors -of Mesh-to-plane Dielectric Barrier Discharge [J]. Journal of Guangdong University of Technology, 2011, 28(3): 1-4.
[7]	CAI Li-Jun, SUN Ming, WANG Hong-Yan-. Research on Optical Emission Spectroscopy of Free Radicals Produced in the Pulse Discharge with NozzleTube Electrodes in Air [J]. Journal of Guangdong University of Technology, 2011, 28(3): 12-14.
[8]	YAO Dan-1, 2 , LU Na-1, 3 , SUN Chang-Hai-1, WU Yan-1, 3 , LI Jie-1, 3 . Factors Affecting H2O2 Formation over Gas Phase Pulsed Discharge in Water [J]. Journal of Guangdong University of Technology, 2011, 28(3): 15-17.
[9]	LI Xue-Wen1, 2 , Li-Yi-Peng1, SUN Li-Fu1, ZHANG Ting-Ting1. An Analysis of the Characteristics of Powder Corona Discharge Inside Concentric Cylindrical Electrodes  [J]. Journal of Guangdong University of Technology, 2011, 28(3): 36-39.
[10]	GU Hong, PAN Xiao-Jian, GUO Jin-Ping-. Electrode Simulation Method for Electrostatic Sensors Based on the Software Analysis of Electromagnetic Field Characteristics [J]. Journal of Guangdong University of Technology, 2011, 28(3): 54-58.
[11]	TANG Yong-jun1,WANG Zhen-long2,GUO Zhong-ning1. Study of Directly Driven Electrode Thread for Miniaturized EDM Device [J]. Journal of Guangdong University of Technology, 2007, 24(4): 53-56.