Journal of Guangdong University of Technology ›› 2009, Vol. 26 ›› Issue (3): 38-41.

• Comprehensive Studies • Previous Articles     Next Articles

Kinetic Simulation and Experimental Research on 1100 kN Crank Press Driven by AC Servo Motor

  

  1. 1.Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China;2.Guangdong Hongxing Machinery Co.Ltd,Foshan 528313,China
  • Online:2009-10-02 Published:2009-10-02

HTML

PDF (PC)

2475

Abstract: The common asynchronous inductive motor replaced by AC servo motor,an 1100 kN AC servo crank press was developed.The flywheel and clutch eliminated,the flexible and intelligent control of the new AC press was realized.A big capacitor was used in the circuit in order to save and release electric energy.Transmission and driving-control systems of the press are introduced.The mathematic model of the electromechanical system is established and the numerical simulation is conducted.The experimental r...

Key words: Forming equipment； mechanical press； AC servo motor； numerical simulation；

[1] 孙友松,周先辉,黎勉,魏良模,黄开胜,何宏肃.  交流伺服压力机及其关键技术[J]. 锻压技术. 2008(04)

[2] 林海,李宏,林洋,李伟.  永磁同步电机矢量控制系统仿真与建模研究[J]. 微电机(伺服技术). 2006(08)

[3] 梁秀玲,王鸿贵,李优新,刘方铭,姚震.  基于变速驱动曲柄压力机储能电容参数分析与计算[J]. 机电工程技术. 2005(05)

[4] 魏良模,朱新榕,孙友松,魏航.  变速驱动曲柄压力机运动分析[J]. 锻压装备与制造技术. 2004(03)

[5] 李颖,朱伯立,张威编.Simulink动态系统建模与仿真基础[M]. 西安电子科技大学出版社, 2004
No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © 2017 Journal of Guangdong University of Technology
Add：729 East Dongfeng RD., Guangzhou PRC. Postcode: 510090
Tel：020-37626653,020-37626139,020-37626396
Email：xbzrb@gdut.edu.cn
Supported:Beijing Magtech