Journal of Guangdong University of Technology ›› 2024, Vol. 41 ›› Issue (02): 44-49.doi: 10.12052/gdutxb.230008

• Civil Engineering • Previous Articles    

Zero Shear Viscosity Analysis of High Modulus Modified Asphalt

Yin Ying-mei, Ou Zhi-xin, Tang Liang-qi, Sun Xiao-long, Lyu Jian-bing   

  1. School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2023-01-28 Published:2024-04-23

HTML

PDF (PC)

352

Abstract: Zero-shear viscosity (ZSV) is an evaluation index for viscosity of asphalt to permanent deformation at high temperature. To investigate the applicability and influence of different test methods and calculation models on ZSV fitting for high modulus modified asphalt, and to promote the application of high modulus modifiers in road engineering, dynamic shear rheometer was used to perform 60 ℃ frequency sweep test and 60 ℃ steady flow test on base asphalt (BA) and high modulus modified asphalt (K1-HMB) with different modifier content. ZSV of test materials was fitted by Cross rheological model and Carreau rheological model. Finally, grey correlation analysis was used to further explore the degree of correlation between ZSV and softening point. The results show that BA and K1-HMB are pseudo-plastic fluids and both exhibited shear thinning characteristics under loading frequency. K1-HMB with 0.6% content had the highest elastic recovery capacity, and the recommended content of K1-HM modifiers was 0.4%～0.6%. The ZSV fitting value based on the 60 ℃ frequency sweep test combined with Cross model had the highest reliability and could be used as an evaluation index of the high temperature performance of high modulus modified asphalt.

Key words: road engineering, high modulus modified asphalt, high temperature performance, zero shear viscosity

CLC Number: 

  • U416.217
[1] 姚欢, 曾迪, 宋小金. 聚合物改性沥青高温路用性能分析[J]. 山东交通科技, 2019(5): 64-67.
YAO H, ZENG D, SONG X J. Analysis of high temperature pavement performance of polymer modified asphalt [J]. Shandong Transportation Technology, 2019(5): 64-67.
[2] BAYARMAA B. 沥青零剪切黏度试验方法及计算模型研究[D]. 大连: 大连理工大学, 2016.
[3] NIVITHA M R, KRISHNAN J M. Rheological characterisation of unmodified and modified bitumen in the 90 ℃~200 ℃ temperature regime [J]. Road Materials and Pavement Design, 2020, 21: 1341-1358.
[4] 耿韩, 李立寒. 道路沥青零剪切黏度与毛细管黏度的比较研究[J]. 石油沥青, 2010, 24(3): 15-21.
GENG H, LI L H. Comparative research on zero shear viscosity and capillary viscosity of paving asphalt [J]. Petroleum Asphalt, 2010, 24(3): 15-21.
[5] 银花, 李凯. 沥青零剪切黏度与高温流变参数灰色关联分析[J]. 建筑材料学报, 2020, 23(1): 108-113.
YIN H, LI K. Grey correlation analysis of zero shear viscosity and high temperature rheological parameters of asphalt [J]. Journal of Building Materials, 2020, 23(1): 108-113.
[6] 胡松山, 王浩, 覃润浦, 等. 沥青四组分与不同加载模式下橡胶沥青零剪切黏度相关性[J]. 复合材料学报, 2018, 35(4): 999-1013.
HU S S, WANG H, QIN R P, et al. Correlation between asphalt four components and asphalt rubber zero shear viscosity under different loading modes [J]. Acta Materiae Compositae Sinica, 2018, 35(4): 999-1013.
[7] SHENOY A. Model-fitting the master curves of the dynamic shear rheometer data to extract a rut-controlling term for asphalt pavements [J]. Journal of Testing & Evaluation, 2002, 30(2): 95-102.
[8] LIU H Q, ZEIADA W, AL-KHATEEB G G, et al. Characterization of the shear-thinning behavior of asphalt binders with consideration of yield stress [J]. Materials and Structures, 2020, 53(4): 105.
[9] QASIM Z I, ABED A H, ALMOMEN K A. Evaluation of mixing and compaction temperatures (MCT) for modified asphalt binders using zero shear viscosity and cross-williamson model[J]. Case Studies in Construction Materials, 2019, 11: e00302.
[10] SHARMA A, NAGA G R R, KUMAR P, et al. Development of an empirical relationship between non-recoverable creep compliance & zero shear viscosity for wide-ranging stiffness of asphalt binders [J]. Construction and Building Materials, 2022, 326: 126764.
[11] 郭咏梅, 倪富健. 几种改性沥青零剪切黏度的测试分析[J]. 交通运输工程与信息学报, 2013, 11(2): 42-46.
GUO Y M, NI F J. Analysis on zero shear viscosity measurement of several modified asphalts [J]. Journal of Transportation Engineering and Information, 2013, 11(2): 42-46.
[12] SHARMA A, RANSINCHUNG R, KUMAR P. Applicability of various mixing rules for hot asphalt recycled binders [J]. Road Materials and Pavement Design, 2021, 23: 2547-2566.
[13] ZEIADA W, LIU H Q, AL-KHATEEB G G, et al. Evaluation of test methods for measurement of zero shear viscosity (ZSV) of asphalt binders [J]. Construction and Building Materials, 2022, 325: 126794.
[14] 樊亮, 樊秀芝, 宋小金, 等. 沥青零剪切黏度的计算模型与方法比较[J]. 新型建筑材料, 2012, 39(5): 20-23.
FAN L, FAN X Z, SONG X J, et al. Comparison of calculation model and methods for asphalt zero shear viscosity [J]. New Building Materials, 2012, 39(5): 20-23.
[15] 杨娥. TLA混合沥青的高温性能指标ZSV研究[J]. 中外公路, 2016, 36(1): 217-220.
YANG E. Study on high temperature performance index ZSV of TLA mixed asphalt [J]. Journal of China & Foreign Highway, 2016, 36(1): 217-220.
[16] 孟勇军, 张肖宁, 贾娟. 基于不同加载模式的沥青零剪切黏度研究[J]. 交通运输工程学报, 2008(4): 35-39.
MENG Y J, ZHANG X N, JIA J. Research on zero shear viscosity of asphalt based on different loading modes [J]. Journal of Traffic and Transportation Engineering, 2008(4): 35-39.
[17] WANG Z X. Correlation analysis of sequences with interval grey numbers based on the kernel and greyness degree [J]. Kybernetes, 2013, 42(2): 309-317.
[18] 孙磊, 佟丽莉. Cox-Merz规则和时温叠加原理在聚合物剪切黏度测量中的应用与研究[J]. 纤维复合材料, 2013, 30(4): 8-12.
SUN L, TONG L L. Application of Cox-Merz relation and time-temperature superposition in the measurement of polymer shear viscosity [J]. Fiber Composites, 2013, 30(4): 8-12.
[19] MOREA F, AGNUSDEI J O, ZERBINO R. Comparison of methods for measuring zero shear viscosity in asphalts [J]. Materials and Structures, 2010, 43: 499-507.
[20] XU F C, ZHAO Y, LI K J. Using waste plastics as Asphalt modifier: a review [J]. Materials, 2022, 15(1): 110.
[21] 敖清文, 田永娅. PE塑料改性沥青试验研究[J]. 公路交通技术, 2016, 32(3): 35-38.
AO Q W, TIAN Y Y. Experimental study on PE plastic modified asphalt [J]. Technology of Highway and Transport, 2016, 32(3): 35-38.
[22] 周正峰, 于晓涛, 陶雅乐, 等. 基于灰色关联分析的树脂与弹性体高黏沥青高温性能评价[J/OL]. 吉林大学学报(工学版), 2023, 53(7): 2078-2088.
ZHOU Z F, YU X T, TAO Y L, et al. High-temperature performance evaluation of resin and elastomer high viscosity asphalt based on grey correlation analysis[J/OL]. Journal of Jilin University (Engineering and Technology Edition), 2023, 53(7): 2078-2088.
[1] Sun Xiao-long, Yuan Jun-shen, Yu Hua-yang, Qin Xiao, Yin Ying-mei. Research Progress of Reflective Marking Materials and Influencing Factors of Retroreflective Properties [J]. Journal of Guangdong University of Technology, 2021, 38(04): 81-94.
[2] Huang Tai-chang, Yin Ying-mei, Lyu Jian-bing, Li Jun-xi. A Study of Deformation Resistance of Modified Asphalt with Different RAP Contents [J]. Journal of Guangdong University of Technology, 2019, 36(03): 103-110.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © 2017 Journal of Guangdong University of Technology
Add：729 East Dongfeng RD., Guangzhou PRC. Postcode: 510090
Tel：020-37626653,020-37626139,020-37626396
Email：xbzrb@gdut.edu.cn
Supported:Beijing Magtech