Journal of Guangdong University of Technology ›› 2020, Vol. 37 ›› Issue (03): 82-87.doi: 10.12052/gdutxb.190086

Previous Articles     Next Articles

A Numerical Simulation and an Analysis of Air Curtain Control Effect on PM2.5 in the Kitchen

Gan Yang-yang, Li Zhi-sheng   

  1. School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2019-06-26 Online:2020-05-12 Published:2020-05-21

HTML

PDF (PC)

2579

Abstract: Cooking in the residential kitchen is an important source of indoor PM2.5. In order to control PM2.5 effectively, the air curtain is proposed as an air supply means. A model of the kitchen is built and a numerical simulation, including airflow organization, temperature distribution and PM2.5 concentration distribution in the kitchen, is performed by using the Fluent software. A numerical simulation is performed to study the control effect of PM2.5 pollutants and heat flow in the kitchen. Three kinds of jet velocities are compared and analyzed. The results of this study show that the jet flow of an air curtain has a good wrapping effect on the cooking area, which can obstruct the diffusion of PM2.5 and the spread of heat flow. The PM2.5 removal rate can be increased to 44%~75%, and the average temperature in the kitchen can be lowered by 1~2 ℃ by using the air curtain to supply air. The control effect is optimal when the air curtain jet velocity is 0.6 m/s. The research productions have reference for the prevention and treatment of PM2.5 pollution in the kitchen and can provide simulation data and a theoretical basis for the study of the air curtain air supply system.

Key words: residential kitchen, fine particulate matter(PM2.5), numerical simulation, air curtain control

CLC Number: 

  • TU834.8
[1] GAO J, JIAN Y, CAO C, et al. Indoor emission, dispersion and exposure of total partcle-bound polycyclic aromatic hydrocarbons during cooking [J]. Atmospheric Environment, 2015, 120(26): 191-199
[2] SAITO E, TANAKA N, MIYAZAKI A, et al. Concentration and particle size distribution of polycyclic aromatic hydrocarbons formed by thermal cooking [J]. Food Chemistry, 2014, 153(9): 285-291
[3] 蔡志良, 孙在, 陈秋方, 等. 厨房油烟超细颗粒排放特征[J]. 中国计量大学学报, 2015, 26(1): 75-79 CAO Z L, SUN Z, CHEN Q F, et al. The emission characteristics of ultrafine particles produced by cooking [J]. Journal of China University of Metrology, 2015, 26(1): 75-79
[4] 吴鑫, 修光利, 王丽娜, 等. 不同种类食用油对颗粒物排放特征的影响[J]. 华东理工大学学报(自然科学版), 2016, 42(1): 65-71 WU X, XIU G L, WANG L N, et al. Impact of oil types on emission characteristics of particles [J]. Journal of East China University of Science and Technology (Natural Science Edition), 2016, 42(1): 65-71
[5] DU B, GAO J, CHEN J, et al. Particle exposure level and potential health risks of domestic chinese cooking [J]. Building & Environment, 2017, 123(44): 564-574
[6] 高军, 曹昌盛, 周翔, 等. 住宅厨房油烟颗粒散发阶段呼吸区短期暴露的实验研究[J]. 建筑科学, 2012, 28(S2): 72-74
[7] GAO J, CAO C, WANG L, et al. Determination of size-dependent source emission rate of cooking-generated aerosol particles at the oil-heating stage in an experimental kitchen [J]. Aerosol and Air Quality Research, 2013, 13(2): 488-496
[8] 范德龙, 曹素珍, 张亚群, 等. 兰州市采暖期居民室内PM2.5污染水平初步研究[J]. 环境与健康杂志, 2014, 31(3): 232-234 FAN D L, CAO S Z, ZHANG Y Q, et al. Preliminary study on indoor PM2.5 pollution levels of residents in Lanzhou during heating period [J]. Journal of Environment & Health, 2014, 31(3): 232-234
[9] WU F, WANG W, MAN Y B, et al. Levels of PM 2.5/PM 10 and associated metal(loid)s in rural households of Henan Province, China [J]. Science of the Total Environment, 2015, 512-513(48): 194-200
[10] AMOUEI T M, OSPANOVA S, BAIBATYROVA A, et al. Contributions of burner, pan, meat and salt to PM emission during grilling [J]. Environmental Research, 2018, 164(53): 11-17
[11] 马广韬, 敖宇. 厨房空气环境质量优化控制[J]. 沈阳建筑大学学报(自然科学版), 2014, 30(6): 1095-1102 MA G T, AO Y. Research on optimization control for quality of kitchen air environment [J]. Journal of Shenyang Jianzhu University (Natural Science), 2014, 30(6): 1095-1102
[12] 史诺, 李雅茹, 乔丽洁. 利用空气幕提高抽油烟机抽吸效率[J]. 轻工机械, 2011, 29(6): 95-97 SHI N, LI Y R, QIAO L J. Applying air screen to improve suction efficiency of range hood in kitchen fan [J]. Light Industry Machinery, 2011, 29(6): 95-97
[13] SIMONE A, OLESEN B W, STOOPS J L, et al. Thermal comfort in commercial kitchens (RP-1469): Procedure and physical measurements (Part 1) [J]. Hvac & Research, 2013, 19(8): 1001-1015
[14] ZHANG W, HE J P, ZHOU R. Numerical simulation on the parameters of smoke buffer with air curtain [J]. Fire Science & Technology, 2013, 10(38): 1093-1096
[15] ZHOU B, CHEN F, DONG Z, et al. Study on pollution control in residential kitchen based on the push-pull ventilation system [J]. Building & Environment, 2016, 107(44): 99-112
[16] 宣凯云, 陈丽萍, 龚延风, 等. 室内细颗粒物(PM2.5)浓度影响因素的数值模拟[J]. 暖通空调, 2016, 46(9): 120-123 XUAN K Y, CHEN L P, GONG Y F, et al. Numerical simulation on factors influencing indoor PM2.5 concentration [J]. Heating Ventilating & Air Conditioning, 2016, 46(9): 120-123
[17] 李志生, 刘旭红, 郑杰东, 等. 登机桥热环境模拟与气流组织分析[J]. 广东工业大学学报, 2018, 35(2): 28-34 LI Z S, LIU X H, ZHENG J D, et al. Thermal environment simulation and airflow distribution analysis of passenger boarding bridge [J]. Journal of Guangdong University of Technology, 2018, 35(2): 28-34
[18] GAO J, CAO C, XIAO Q, et al. Determination of dynamic intake fraction of cooking-generated particles in the kitchen [J]. Building and Environment, 2013, 65(44): 146-153
[19] LIU Y, LI H, FENG G. Simulation of inhalable aerosol particle distribution generated from cooking by Eulerian approach with RNG k-epsilon turbulence model and pollution exposure in a residential kitchen space [J]. Building Simulation, 2017, 10(1): 1-10
[20] GAO J, CAO C, ZHANG X, et al. Volume-based size distribution of accumulation and coarse particles (PM0.1–10) from cooking fume during oil heating [J]. Building & Environment, 2013, 59(3): 575-580
[21] 张辉辉. 厨房颗粒物分布运动规律及数值分析[D]. 哈尔滨: 哈尔滨工业大学, 2016.
[22] CHEN C, ZHAO Y, ZHANG Y, et al. Source strength of ultrafine and fine particle due to Chinese cooking [J]. Procedia Engineering, 2017, 205(11): 2231-2237
[23] 中华人民共和国住房和城乡建设部. GB 50736-2012, 《民用建筑供暖通风与空气调节设计规范》[S]. 北京: 中国建筑工业出版社, 2012.
[1] Liu Xiao-zhou, Zhu Rui, Zhu Guang-yu. Numerical Simulation and Experimental Research of Methane-hydrogen Combustion Technology on Swirl Gas Stove [J]. Journal of Guangdong University of Technology, 2023, 40(01): 113-121.
[2] Dai Mei-ling, Cheng Cheng, Wu Zhi-wen, Lu Zhen-wei, Lu Jie-xun, Yang Jian, Yang Fu-jun. Quasi-static Compressive Mechanical Behaviors of Perforated Hollow-Sphere Structures [J]. Journal of Guangdong University of Technology, 2022, 39(04): 83-90,97.
[3] Liu Xiao-zhou, Zhu Guang-yu. A Research on Gas Flow Characteristics and Structure Optimization in Primary Air Chamber of Circulating Fluidized Bed Boiler [J]. Journal of Guangdong University of Technology, 2022, 39(03): 116-124.
[4] Li Yu-hang, Gao Zhen-yu, Yang Xue-qiang, Liu Pan. Test and Numerical Analysis of Penetration Resistance of Static Pressure Steel Sheet Pile [J]. Journal of Guangdong University of Technology, 2022, 39(01): 129-134.
[5] Luo Jun-wu, Li Dong-mei, Liang Shuai, Wang Shuai-chao, Xiao Shu-hong. A Research on Numerical Simulation of Droplet Generation in Crossing Microchannels [J]. Journal of Guangdong University of Technology, 2020, 37(05): 68-74.
[6] Liu Chen-lin, Zheng San-qiang, Han Xiao-zhuo. A Spatio-temporal Dynamic Analysis of a Predation-competition System with Allee Effect [J]. Journal of Guangdong University of Technology, 2019, 36(06): 38-44.
[7] Wu Cheng-he, Liu Li-ru, Chen Yi-gang, Wang Zhang-yuan. A Performance Study of Solar Chimney with Rotating Collector [J]. Journal of Guangdong University of Technology, 2018, 35(05): 70-74.
[8] Li Zhi-sheng, Liu Xu-hong, Zheng Jie-dong, Liu Li-ru, Wang Xiao-xia. Thermal Environment Simulation and Airflow Distribution Analysis of Passenger Boarding Bridge [J]. Journal of Guangdong University of Technology, 2018, 35(02): 28-34.
[9] ZHAO Bing-Chun, WANG Xin, LAI Zhi-Ping. Effects of Building Layout Forms on Thermal environment in Residential Districts [J]. Journal of Guangdong University of Technology, 2016, 33(06): 91-95.
[10] WANG Chang-Hong， HUANG Jiong-Tong， ZENG Wen-Qiang. Numerical Simulation and Analysis of Heat Transfer Characteristics in Electrode of Spot Welding for High Melting Steel [J]. Journal of Guangdong University of Technology, 2016, 33(03): 6-10.
[11] LIU Yong-Jian, LIU Yi-Mei, CHEN Chuang-Xin, WANG Ying, LUO Qi-Yang, LIN Hui. Research on Deformation Characteristics of Protective Structure of Deep Foundation Pit in Soft Soil [J]. Journal of Guangdong University of Technology, 2016, 33(01): 89-94.
[12] YANG Yi. Finite Volume Method Model for Unsteadystate Heat and Mass Transfer in Seawater Solar Pond [J]. Journal of Guangdong University of Technology, 2015, 32(2): 120-125.
[13] Lai Zhiping, Wang Xin. Numerical Simulation of Wind Pressure Distribution on Building Surfaces at a Convention Centre [J]. Journal of Guangdong University of Technology, 2014, 31(2): 78-84.
[14] YANG Chun-Shan, HE Na, ZHANG Ya-Ning-. Numerical Analysis of Seepage stress Coupling of  Deep Foundation Pit Excavation [J]. Journal of Guangdong University of Technology, 2013, 30(4): 43-48.
[15] Gong Chen，Wang Xin. Research on the Characteristics of Local Atmospheric Flow in Urban Residential Areas [J]. Journal of Guangdong University of Technology, 2012, 29(3): 103-106.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © 2017 Journal of Guangdong University of Technology
Add：729 East Dongfeng RD., Guangzhou PRC. Postcode: 510090
Tel：020-37626653,020-37626139,020-37626396
Email：xbzrb@gdut.edu.cn
Supported:Beijing Magtech