Loading...
Current Issue
  • , Volume 26 Issue 2 Previous Issue    Next Issue
    Comprehensive Studies
    Novel Design of Electric Locks Based on iButton
    Lin Li-chun
    Journal of Guangdong University of Technology. 2009, 26 (2): 1-.  
    Abstract    HTML ( )   PDF(146KB)
    In traditional electric locks power is often supplied from the interior of the locks by battery or alternating currents.The traditional electric lock will just be a normal lock if the supply is powered off by battery or alternating current.It proposes the design of a novel electric lock in which iButton is employed and the power is supplied from the outside.The novel electric lock not only can be burglary-proof,but the power supply problem can be solved.
    References | Related Articles | Metrics
    The Treatment of Low Turbidity Kaolin Suspensions Containing Sodium Dodecyl Sulfate with Nanosilica and the Absorption Properties
    Li Dong-mei1; Liu Chun-liu1; Ren Yi1; Shi Zhou2
    Journal of Guangdong University of Technology. 2009, 26 (2): 2-.  
    Abstract    HTML ( )   PDF(1116KB)
    Anionic surfactant-Sodium Dodecyl Sulfate(SDS) was chosen as a representative of the dissolved low weight organic matters.With morphology theory,and electron microscopic observation and image analysis technology,it investigated nanosilica effect mechanism,adsorption flocculation efficiencies,and morphologic properties by conducting the coagulation and sedimentation experiment,and by adding of a new chemical-silica nanoparticles to 6 NTU Kaolin suspensions,The experimentation results show the treatment effec...
    References | Related Articles | Metrics
    The Application of Composite Soil Nailing Walls in a Deep Foundation Pit
    Chen Chang-wen1; Liu Yong-jian1; Wang wei-cheng2
    Journal of Guangdong University of Technology. 2009, 26 (2): 3-.  
    Abstract    HTML ( )   PDF(864KB)
    On the base of a deep foundation pit in Guangzhou,through analyzing engineering geological conditions and venues surrounding the environment,it proposes the design method of composite soil nailing walls and construction program.At the same time,it suggests ways to handle the special circumstances during the construction period,and analyses the causes.The excavation site monitoring results verify the practicality of composite soil nailing in the pit maintenance.
    References | Related Articles | Metrics
    A Study of Pushover Analysis Method
    Guan Mins-heng1; 2
    Journal of Guangdong University of Technology. 2009, 26 (2): 4-.  
    Abstract    HTML ( )   PDF(669KB)
    The basic principles and processes of pushover analysis are introduced.Some crucial aspects,including lateral load distribution,converting MDOF system into SDOF system,and solving the problem of target displacement with the capacity spectrum method,are discussed in detail.One twelve-story reinforced concrete frame structure is analyzed by the method of pushover analysis.The method has been proved to be effective for the evaluation structure performance.
    References | Related Articles | Metrics
    A Simulation Model for Controllability and Stability of the Wagon with Unique Suspension System
    Chen Lian-yun1; Liu Gui-xiong2
    Journal of Guangdong University of Technology. 2009, 26 (2): 5-.  
    Abstract    HTML ( )   PDF(640KB)
    A multi-body system dynamics simulation model was established for a wagon by means of a redeveloped module of ADAMS/CAR.According to the national standard and the test evaluation method on the vehicle steering stability,the simulation and tests under typical working conditions were performed and discussed.The results indicate that the simulation is precise and reliable.The multi-body system dynamics simulation model can be applied to the optimization of Controllability and Stability.
    References | Related Articles | Metrics
    The Study of the Container Used for Storing Al-Si Alloy for Heating
    Li Hui-peng; Zhang Ren-yuan; Chen Xiao; Liu Zong-jian
    Journal of Guangdong University of Technology. 2009, 26 (2): 6-.  
    Abstract    HTML ( )   PDF(939KB)
    A series of tests were conducted to study the weight metal corrosion of container materials used by dint of peeling for storing Al-Si alloy.The results show that the carborundum containers are better at preventing corrosion of Al-Si alloy than 316 stainless steel,and the plumbago containers can t be used for storing the Al-Si alloy,under below 620 ℃.After the 240 hot circle,the carborundum containers don t corrode,and are excellent in preventing corrosion of Al-Si alloy,so they can be used for depositing he...
    References | Related Articles | Metrics
    Exploiting the GeoRobot with GeoCOM
    Wang Yu-hui; Jiang Li-long
    Journal of Guangdong University of Technology. 2009, 26 (2): 7-.  
    Abstract    HTML ( )   PDF(133KB)
    GeoCOM is brought by Leica company expediently for the client to exploit the TPS 1000 or TPS 1100 serial Total Station.It introduces the two methods of using GeoCOM to control the TPS,and compares them.Finally,the application of function call protocol in deformation monitoring system has been proposed.
    References | Related Articles | Metrics
    Tunable Refractive Index of Magnetic Fluids and Its Application
    Yu Jun1; Zhao Wei-ren1; Sun Chang-jun2; Zhang Wei1; Hu Zheng-fa1; Liu Xiao-hua1
    Journal of Guangdong University of Technology. 2009, 26 (2): 8-.  
    Abstract    HTML ( )   PDF(714KB)
    It summarizes the method of measuring the refractive index of the magnetic fluids,and discusses the influence of various factors including the external field,the concentration of magnetic particles,film thickness,temperature and the incident power density,on the refractive index of magnetic fluids.The application of the tunable refractive index of magnetic fluids in devices and its development are proposed.
    References | Related Articles | Metrics
    Dispersion of Carbon Nanotubes in Aqueous Solution with Glycol
    Liu Zong-jian; Zhang Ren-yuan; Mao Ling-bo; Li Hui-peng
    Journal of Guangdong University of Technology. 2009, 26 (2): 9-.  
    Abstract    HTML ( )   PDF(159KB)
    After being purified with the mixture of sulfuric acid and nitric acid,the carbon nanotubes(CNTs) were dispersed in aqueous solution with various surfactants by ultrasonic agitation.Then the dispersity was evaluated with settlement time.The experimental rersults show that the carbon nanotubes disperse very well in the HTAB or OP emulsifying agent with an appropriate concentration.
    References | Related Articles | Metrics
    Influence of Heat-treatment on Characteristics of Fine Glass Powder for Al_2O_3-SiO_2-P_2O_5-CaF_2 System by Liquid Precipitation
    Ni Xue-ming; Yuan Ge-cheng; Zheng Yong; Xie Yi
    Journal of Guangdong University of Technology. 2009, 26 (2): 10-.  
    Abstract    HTML ( )   PDF(937KB)
    Glass powder of Si-Al-Ca-P-F-system,which was heat-treated under 673,773,873,973,1 073 and 1 173 K respectively,was prepared by liquid precipitation method,Influence rules of heat-treatment on crystallized state,glass change and precipitation behavior,micromorphology,microstructure of the powder were researched by XRD,DSC,TEM,FT-IR and other test methods.The results show that the hollow nano powder reunites and collapses obviously at 673K,and it appeares the same amorphous as the raw powder at 773 K.The par...
    References | Related Articles | Metrics
    Sensitivity Analysis in Bilevel Multiobjective Optimization with Perturbational Parameters in Lower Level
    Liu Yu-lan
    Journal of Guangdong University of Technology. 2009, 26 (2): 11-.  
    Abstract    HTML ( )   PDF(148KB)
    sensitivity analysis in bilevel multiobjective optimization with perturbational parameters in lower level is done,by using sensitivity analysis of set-value optimization.
    References | Related Articles | Metrics
    A Matrix Presentation of n Variable Polynomial Ring on Ring R with Identity 1
    Ou Min
    Journal of Guangdong University of Technology. 2009, 26 (2): 12-.  
    Abstract    HTML ( )   PDF(117KB)
    It defines a matrix ring on ring R,and then gives a matrix presentation of n variable polynomial ring on ring R with identity 1.
    References | Related Articles | Metrics
    The Criteria for Tri-diagonal Period Class Inverse M-Matrices
    Zhu Hui-hua1; Liu Jian-zhou2
    Journal of Guangdong University of Technology. 2009, 26 (2): 13-.  
    Abstract    HTML ( )   PDF(174KB)
    Partitioning specially and using the properties of schur compelements matrices,it gets the necessary and sufficient conditions for inverse M-matrices;the properties of tri-diagonal period inverse M-matrices and the necessary and sufficient conditions for the tri-diagonal matrices are combined,and the necessary and sufficient conditions of the tri-diagonal period inverse M-matrices are obtained.
    References | Related Articles | Metrics
    Quantum Size Effects on Electronic Dynamics of Quasi-one-dimensional Nanowires
    Yang Cheng-ying1; Chen Yong2
    Journal of Guangdong University of Technology. 2009, 26 (2): 14-.  
    Abstract    HTML ( )   PDF(215KB)
    Both the finite size and the disorder considered,it explores the dynamic behavior of electron in the finite-width nanowires and carbon nanotubes in terms of the quantum diffusion theory.The results show that there exists a transition from ballistic to localized behavior with the disorder strength increasing,similar to that in two-dimensional quasiperiodic systems.For a given disorder,the ballistic-nonballistic transition is also obtained with the nanowire width increasing,exhibiting a typical quantum size e...
    References | Related Articles | Metrics
    On the Method of Identifying Fault Location from InSAR Data
    Wang Hua
    Journal of Guangdong University of Technology. 2009, 26 (2): 15-.  
    Abstract    HTML ( )   PDF(829KB)
    It proposes a threshold exclusive or algorithm to identify fault locations using coherence information.The method of identifying fault locations of the Manyi earthquake using coherence and azimuth offset data was discussed.The result shows that the fault location from coherence data agrees well with that from the azimuth offset data.Therefore,this method can be used to identify fault locations.
    References | Related Articles | Metrics